Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for Gasoline Model) › 2020.07–2020.09
NM36W0E _57 Power Source / Network _088338 NETWORKING _0421310 CAN COMMUNICATION SYSTEM(for Gasoline Model) CO CONTROL F

NETWORKING  CAN COMMUNICATION SYSTEM(for Gasoline Model)  CONTROL  CAN COMMUNICATION CONTROL  


FUNCTION


CAN Connection Components

*1: Models with Toyota Safety Sense

*2: Models with blind spot monitor system

*3: Models with parking assist monitor system

*4: Models with parking support brake system

*5: Models with CVT

*6: Models with stop and start system

*7: Models with headup display

*8: Models with DCM

*9: Models with entry and start system

*10: Models with tire pressure warning system

*11: Models without entry and start system

*12: Models with CAN compatible optional devices

Central Gateway ECU (Network Gateway ECU) Forward Recognition Camera*1
Millimeter Wave Radar Sensor Assembly*1 Blind Spot Monitor Sensor LH*2
Rear Television Camera Assembly*3 Clearance Warning ECU Assembly*4
Transmission Control ECU*5 ECM
Engine Stop and Start ECU*6 Headup Display (Meter Mirror Sub-assembly)*7
DCM (Telephone Transceiver Assembly)*8 Radio and Display Receiver Assembly
Combination Meter Assembly Skid Control ECU (Brake Actuator Assembly)
Airbag Sensor Assembly Steering Sensor
Power Steering ECU Assembly Certification ECU (Smart Key ECU Assembly)*9
Air Conditioning Amplifier Assembly Main Body ECU (Multiplex Network Body ECU)
Electrical Key and TPMS Receiver Assembly*9, *10/Door Control and Tire Pressure Monitoring System Receiver Assembly*10, *11 Option Connector (Bus Buffer ECU)*12


DIAGNOSIS


a.

If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.


b.

The 5-digit DTCs can be read by connecting the GTS to the DLC3.


c.

For details, refer to the Repair Manual.