FUNCTION
The wireless door lock control system has the following functions:
| Function*1 | Outline |
|---|---|
| All Doors Lock | Pressing the lock button of the door control transmitter assembly*2 or electrical key transmitter sub-assembly*3 locks all doors and the back door. |
| All Doors Unlock | Pressing the unlock button of the door control transmitter assembly*2 or electrical key transmitter sub-assembly*3 unlocks all doors and the back door. |
| Answer Back | When the doors are being locked or unlocked using the door control transmitter assembly*2 or electrical key transmitter sub-assembly*3, the wireless door lock buzzer sounds*4 and the hazard warning lights blink once while locking and twice while unlocking. |
| Door Ajar Warning*3 | If any door is open or ajar, pressing the lock button of electrical key transmitter sub-assembly will cause the wireless door lock buzzer to sound for about 5 seconds. |
| Automatic Relock | If none of the doors are opened for 30 seconds after being unlocked by the wireless door lock control, all the doors are locked again automatically. |
| Security | Sends a door lock/unlock operation request signal as a rolling code. |
*1: The default setting differs depending on the model.
*2: Models without entry and start system
*3: Models with entry and start system
*4: Models with answer back buzzer function
DIAGNOSIS
If there is a malfunction in the system, the main body ECU stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.