Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type) › 2020.07–2020.09
NM36W0E _56 Audio / Visual / Telematics _088596 AUDIO / VIDEO _0433891 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) CO CONTROL F

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  CONTROL  AUDIO CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models without 8-speaker system

*2: Models with 8-speaker system

*3: Models with DCM (telephone transceiver assembly)

*4: Models without DCM (telephone transceiver assembly)

*5: Models with Digital Audio Broadcast (DAB) Tuner

*6: Models with headup display

*7: Gasoline models

*8: Models with CVT

*9: Models with manual transaxle

*10: HV models

*11: Models with electric parking brake system

*12: Models without electric parking brake system

Radio and Display Receiver Assembly
·

Outputs the audio signal of the selected audio source to the speakers*1 or stereo component amplifier assembly*2.

·

Sends each sound source and hands-free system status to the combination meter.

·

Using the equipped 2.4GHz frequency band wireless LAN, communicates via Wi-Fi with a wireless LAN access point, a tethering capable mobile phone or Wi-Fi mobile router.


Speakers Output the audio sounds.
Roof Antenna Assembly
·

AM

·

FM


Receives AM/FM radio broadcasts via the roof antenna assembly.
Window Glass Antenna Wire (Rear)*5
·

DAB


Receives radio broadcasting signals (DAB).
Digital Audio Broadcasting Antenna Assembly*5 Amplifies DAB signals from the DAB antenna and sends them to the radio and display receiver assembly.
Steering Pad Switch Assembly Sends operation signals such as volume adjustment, mode selection and song selections to the radio and display receiver assembly.
Telephone Microphone Assembly
·

Detects voice during hands-free conversations and voice commands.

·

Is installed in the map light assembly and converts sound waves to an electrical signal and sends it to the radio and display receiver assembly*4 or DCM (telephone transceiver assembly)*3.


No. 1 Stereo Jack Adapter Assembly
·

When a USB memory device, portable audio player (USB type) or Apple device is connected, communicates with the radio and display receiver assembly via USB.


Combination Meter Assembly
·

Displays various information and operation signals on the multi-information display sent from the radio and display receiver assembly via local bus communication.

·

Sends the vehicle speed signal to the radio and display receiver assembly and stereo component amplifier assembly*2.


Meter Mirror Sub-assembly*6 Displays various information on the head up display sent from the radio and display receiver assembly via local bus communication.
Navigation Antenna Assembly
·

GPS Antenna


Receives signals from GPS satellites and transmits these signals to the radio and display receiver assembly.
Park/Neutral Position Switch Assembly*7*8 Sends an R shift position signal to the radio and display receiver assembly.
Back-up Light Switch Assembly*9
Power Distribution Box Assembly*10
Hybrid Vehicle Control ECU*10 Sends an R shift position signal to the power distribution box assembly.
Brake Actuator Assembly*11
·

Skid Control ECU


Sends the parking brake position signal to the radio and display receiver assembly.
Parking Brake Switch Assembly*12
Stereo Component Amplifier Assembly*2 Amplifies audio signals sent from the radio and display receiver assembly and sends them to the speakers.
DCM (Telephone Transceiver Assembly)*3 Sends microphone voice signals sent from the telephone microphone assembly to the radio and display receiver assembly.


DIAGNOSIS


a.

For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.