Home › Engine / Hybrid System › STOP AND START › STOP AND START SYSTEM › from 2020.07
NM36W0E _51 Engine / Hybrid System _091800 STOP AND START _0434050 STOP AND START SYSTEM GE GENERAL F

STOP AND START  STOP AND START SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

To achieve low emissions and enhanced fuel economy, the stop and start system has been developed.


b.

The stop and start system automatically stops the engine when the vehicle comes to a stop, such as when the vehicle stops at a red traffic light. When starting off, the engine is automatically restarted without requiring any extra activity from the driver.

Models with CVT
W145980E01
1.542,0.292 2.333,0.51 0.792,0.219 10 false Deceleration 2.625,0.292 3.5,0.542 0.875,0.25 10 false Vehicle Stop 3.802,0.292 4.51,0.542 0.708,0.25 10 false Idling Stop 4.76,0.292 5.75,0.5 0.99,0.208 10 false Engine Restart 5.938,0.292 6.771,0.542 0.833,0.25 10 false Acceleration 0.417,1.5 1.25,1.75 0.833,0.25 10 false Brake Pedal 0.448,2.25 1.198,2.646 0.75,0.396 10 false Accelerator Pedal 0.479,3.375 1.188,3.854 0.708,0.479 10 false Shift Lever Position 1.802,3.5 1.958,3.688 0.156,0.188 10 false D 2.896,3.615 3.052,3.823 0.156,0.208 10 false D 4.01,3.615 4.188,3.813 0.177,0.198 10 false D 5.125,3.5 5.302,3.698 0.177,0.198 10 false D 6.25,3.5 6.417,3.677 0.167,0.177 10 false D 2.104,1.5 2.781,1.833 0.677,0.333 10 true Depressed 2.271,2.49 2.896,2.792 0.625,0.302 10 true Released 5.542,1.615 6.167,1.917 0.625,0.302 10 true Released 5.458,2.365 6.135,2.667 0.677,0.302 10 true Depressed 2.906,3.302 3.063,3.51 0.156,0.208 10 false P 4.01,3.302 4.167,3.51 0.156,0.208 10 false P

Models with Manual Transaxle
W145981E01
1.542,0.292 2.333,0.51 0.792,0.219 10 false Deceleration 2.625,0.292 3.5,0.542 0.875,0.25 10 false Vehicle Stop 3.802,0.292 4.51,0.542 0.708,0.25 10 false Idling Stop 4.76,0.292 5.75,0.5 0.99,0.208 10 false Engine Restart 5.938,0.292 6.771,0.542 0.833,0.25 10 false Acceleration 0.417,1.448 1.25,1.75 0.833,0.302 10 false Brake Pedal 0.396,2.333 1.292,2.667 0.896,0.333 10 false Clutch Pedal 0.479,3.417 1.188,3.896 0.708,0.479 10 false Shift Lever 1.583,1.667 2.26,2 0.677,0.333 10 false Depressed 4.896,1.302 5.521,1.604 0.625,0.302 10 false Released 5.01,2.177 5.635,2.479 0.625,0.302 10 false Released 4.719,2.563 5.396,2.896 0.677,0.333 10 false Depressed 2.688,2.177 3.313,2.479 0.625,0.302 10 false Released 2.063,2.552 2.781,2.885 0.719,0.333 10 true Depressed 2.833,3.646 3.458,3.948 0.625,0.302 10 false Neutral 4.75,3.646 6.031,4 1.281,0.354 10 true Moved from Neutral


c.

The stop and start system consists of an engine stop and start ECU, backup boost converter and starter assembly.


d.

Based on signals from various sensors, switches, and the ECM, the engine stop and start ECU controls the stopping and starting of the engine.


e.

When the engine is stopped, the ECM stores the crankshaft angle. This is used to determine which cylinder to inject fuel into and ignite the next time the engine is restarted. This shortens the amount of time necessary to restart the engine.


f.

To allow management of the lifespan of the starter assembly, the engine stop and start ECU counts the number of times the starter operates. If the number exceeds a threshold, the ECU blinks the stop and start cancel indicator light to inform the driver that a replacement is required.

HINT:

After the starter assembly has been replaced, it is necessary to clear the record of the number of times that the starter assembly has been operated. For details, refer to the Repair Manual.



g.

During idling stop, the oil pump with motor assembly operates to ensure a stable CVT fluid pressure, achieving a smooth start off. (Models with CVT)


h.

A hill-start assist function is provided in order to assist smooth starting on a slope while the engine is restarted after idling stop. The skid control ECU retains the brake hydraulic pressure until sufficient driving force is generated. (Models with CVT)


i.

Operating conditions of the stop and start system, such as the amount of time idling stop was performed, and various advice and warnings are provided using the multi-information display, stop and start indicator light and stop and start cancel indicator light in the combination meter assembly.


j.

An operation limit which prohibits stop and start system control under certain conditions is provided to protect the battery when a non-specified battery is used.


k.

Through the use of a high performance battery and high-precision battery state sensor assembly, the amount of time until the threshold value for idle stop prohibition is reached has been extended and the idle stop operation permission range has been expanded.


l.

Stop and start operation time when the air conditioning is operating can be changed between "Standard" and "Extended (the stop and start system has priority)" by using the steering pad switch assembly, enabling the user to select the preferred setting.


m.

When a stop sign is recognized, engine stop by the stop and start system is delayed to reduce unnecessary stoppage of the engine. By working in cooperation with the road sign assist system, ease of driving is facilitated. (Models with Toyota Safety Sense)