Home › Engine / Hybrid System › STOP AND START › STOP AND START SYSTEM › from 2020.07
NM36W0E _51 Engine / Hybrid System _091800 STOP AND START _0434050 STOP AND START SYSTEM DE DETAILS F

STOP AND START  STOP AND START SYSTEM  DETAILS  ELECTRIC OIL PUMP FOR CVT  


CONSTRUCTION


a.

The oil pump with motor assembly is provided for the stop and start system and is controlled by the engine stop and start ECU.


b.

The oil pump with motor assembly enables a stable CVT fluid supply during idle stop, and delivers good responsiveness and smoothness at the time of start off.


c.

The oil pump with motor assembly only operates when the engine is in the idle stop status. While the engine is operating, CVT fluid is supplied from the oil pump assembly.

W145975C01
3.938,3.063 4.188,3.479 4.188,3.479 4.354,3.479 true 4.427,3.375 4.74,3.531 0.313,0.156 10 false *1
*1 Oil Pump with Motor Assembly - -



d.

The oil pump with motor assembly consists of an oil pump motor driver section, DC sensorless and brushless motor section, and oil pump section.


e.

The oil pump motor driver controls the oil pump with motor assembly according to the signals from the engine stop and start ECU.

W139998C01
3.531,1.875 4.167,0.833 4.167,0.833 4.333,0.833 true 3.521,1.729 4.167,0.583 4.167,0.583 4.333,0.583 true 3.5,1.167 4,0.333 4,0.333 4.167,0.333 true 2.167,0.583 2.333,0.583 2.333,0.583 3,1.667 true 4.115,2.167 4.365,2.583 4.365,2.583 4.531,2.583 true 2.333,0.281 2.5,0.281 2.5,0.281 3.333,1.615 true 2,0.479 2.313,0.635 0.313,0.156 10 false *1 2.156,0.177 2.469,0.333 0.313,0.156 10 false *2 4.24,0.229 4.552,0.385 0.313,0.156 10 false *3 4.406,0.479 4.719,0.635 0.313,0.156 10 false *4 4.406,0.729 4.719,0.885 0.313,0.156 10 false *5 4.594,2.479 4.906,2.635 0.313,0.156 10 false *6 2.771,3.188 3.083,3.344 0.313,0.156 10 false *a 3.417,3.188 3.729,3.344 0.313,0.156 10 false *b 3.906,3.188 4.219,3.344 0.313,0.156 10 false *c
*1 Pump Rotor *2 Magnet
*3 Stator *4 Yoke
*5 Shaft *6 Oil Pump Motor Driver
*a Oil Pump Section *b DC Sensorless and Brushless Motor Section
*c Oil Pump Motor Driver Section - -




OPERATION


a.

The oil pump assembly in the CVT, which is powered by the engine, generates oil pressure. When the oil pump assembly is generating sufficient oil pressure, the oil pump with motor assembly is not operating and is isolated by a check valve located in the discharge section of the oil pump with motor assembly.

W145982E01
2.063,0.323 3.104,0.552 1.042,0.229 10 false CVT Valve Body 1.365,1.583 2,2.021 0.635,0.438 10 false Oil Pump Assembly 2.167,2.01 2.813,2.219 0.646,0.208 10 false Operating 3.458,2.01 4.323,2.24 0.865,0.229 10 false Not Operating 2.906,1.365 3.698,1.594 0.792,0.229 10 false Check Valve 4.813,1.854 6.906,2.146 2.094,0.292 10 false Oil Pump with Motor Assembly 1.417,3.302 2.167,3.531 0.75,0.229 10 false Oil Strainer 2.521,3.302 3.052,3.521 0.531,0.219 10 false Oil Pan 5.292,3.406 6.333,3.635 1.042,0.229 10 false : Oil Flow


b.

During idle stop operation, the oil pump assembly in the CVT stops generating oil pressure. At this time, the oil pump with motor assembly operates and generates oil pressure to open the check valve and supply oil pressure to the CVT valve body.

W145983E01
5.302,3.406 6.104,3.656 0.802,0.25 10 false : Oil Flow 1.365,1.583 2.01,2.042 0.646,0.458 10 false Oil Pump Assembly 2.052,0.323 3.073,0.563 1.021,0.24 10 false CVT Valve Body 2.885,1.365 3.688,1.625 0.802,0.26 10 false Check Valve 1.417,3.313 2.167,3.573 0.75,0.26 10 false Oil Strainer 2.146,2.01 3.031,2.24 0.885,0.229 10 false Not Operating 3.417,2.01 4.063,2.24 0.646,0.229 10 false Operating 4.813,1.854 6.948,2.229 2.135,0.375 10 false Oil Pump with Motor Assembly 2.521,3.313 3.063,3.542 0.542,0.229 10 false Oil Pan


c.

During engine automatic start operation, oil pressure generated by both the oil pump with motor assembly and the oil pump assembly is applied to the system. When the oil pressure generated by the oil pump assembly exceeds the oil pressure generated by the oil pump with motor assembly, the check valve closes and the oil pressure generated from the oil pump with motor assembly is no longer applied. The oil pump with motor assembly stops according to engine speed signals.

W145984E01
4.083,0.323 6.844,0.802 2.76,0.479 10 false A<B (Immediately after engine start, the oil pressure from the oil pump assembly is low.) 4.083,1.313 6.323,1.813 2.24,0.5 10 false A=B (Oil pressure from the oil pump assembly increases gradually.) 4.083,2.26 6.865,2.573 2.781,0.313 10 false A>B (Oil pump with motor assembly stops.) 3.5,0.448 4.417,0.646 0.917,0.198 10 false Middle 3.5,1.448 4.417,1.646 0.917,0.198 10 false Middle 1.792,1.448 2.708,1.646 0.917,0.198 10 false Middle 1.938,0.448 2.854,0.646 0.917,0.198 10 false Low 2.26,0.594 2.417,0.792 0.156,0.198 10 false A 2.26,1.604 2.417,1.802 0.156,0.198 10 false A 2.26,2.615 2.417,2.813 0.156,0.198 10 false A 3.302,0.594 3.458,0.792 0.156,0.198 10 false B 3.302,1.604 3.458,1.802 0.156,0.198 10 false B 3.302,2.615 3.458,2.813 0.156,0.198 10 false B 1.917,2.448 2.833,2.646 0.917,0.198 10 false High 2.052,3.292 3.208,3.521 1.156,0.229 10 false CVT Valve Body 1.344,4.573 2,4.99 0.656,0.417 10 false Oil Pump Assembly 2.177,5.01 3.333,5.24 1.156,0.229 10 false Operating 3.448,5 4.604,5.229 1.156,0.229 10 false Operating 1.417,6.302 2.573,6.531 1.156,0.229 10 false Oil Strainer 2.521,6.365 3.677,6.594 1.156,0.229 10 false Oil Pan 5.313,6.448 6.469,6.677 1.156,0.229 10 false : Oil Flow 4.833,4.833 7.094,5.073 2.26,0.24 10 false Oil Pump with Motor Assembly 2.896,4.365 4.052,4.594 1.156,0.229 10 false Check Valve