CONSTRUCTION
The backup boost converter uses a semiconductor relay. The semiconductor relay also functions as a fuse. When overcurrent is detected, the relay is turned off to protect the circuit.
The backup boost converter supplies battery voltage to help make up for the voltage drop that occurs when the engine is restarted. This prevents the operation of the following equipment from being interrupted due to low battery voltage.
|
*1: Models with CVT *2: Models with automatic air conditioning system *3: Models with Toyota Safety Sense *4: Models with parking support brake system *5: Models with radio and display receiver assembly *6: Models with navigation system *7: Models with headup display *8: Models with parking assist monitor system *9: Models with entry and start system *10: Models without entry and start system |
| Oil Pump with Motor Assembly*1 |
| Power Steering ECU Assembly |
| Combination Meter Assembly |
| Skid Control ECU |
| Air Conditioning Control Assembly*2 |
| Millimeter Wave Radar Sensor Assembly*3 |
| Clearance Warning ECU Assembly*4 |
| Radio and Display Receiver Assembly*5 |
| Navigation ECU*6 |
| Headup Display (Meter Mirror Sub-assembly)*7 |
| Rear Television Camera Assembly*8 |
| Electrical Key and TPMS Receiver Assembly*9/Door Control and Tire Pressure Monitoring System Receiver Assembly*10 |
An external backup boost converter (eco-run vehicle converter assembly) is used. (Models with stereo component amplifier assembly)
When the audio system is used during idle stop, the external backup boost converter (eco-run vehicle converter assembly) compensates for the voltage drop to supplement audio playback by stabilizing the sound quality.