FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
|
*Models with Entry and Start System |
||
| Headlight Assembly LH | Headlight ECU Sub-assembly LH | Supplies power to the headlights. |
| Headlight Assembly RH | Headlight ECU Sub-assembly RH | |
| Main Body ECU (Multiplex Network Body ECU) | Receives various signals and illuminates the headlights. | |
| Steering Sensor | Sends the light control switch position signal to the main body ECU. | |
| Turn Signal Switch | Light Control Switch | Sends the light control switch position signal to the steering sensor. |
| Dimmer Switch | Sends the dimmer switch position signal to the steering sensor. | |
| Central Gateway ECU (Network Gateway ECU) | Relays the signals between the CAN communication lines. | |
| Semiconductor Power Integration ECU | Receives the headlight control signal from the Main Body ECU (Multiplex Network Body ECU) and sends the supplies power to the headlights. | |
| Automatic Light Control Sensor | Detects the ambient light level and transmits a signal to the main body ECU (multiplex network body ECU). | |
| Certification ECU (Smart Key ECU Assembly)* | Sends ignition switch condition signals to the main body ECU (multiplex network body ECU). | |
SYSTEM CONTROL
The headlight temporary lighting system operates if the lever of the dimmer switch is pulled and released when both of the following conditions are met:
The ignition switch is off.
The light control switch is in the AUTO position.