CONSTRUCTION
"IGNITION ON" or "ACCESSORY" is displayed on the combination meter assembly according to the current power source change condition. In addition, when the engine can be started, "Key Certification Indicator" is displayed on the multi-information display. As a result, the user can check the current power source change condition and engine startability condition.
When a malfunction occurs in the entry and start system, a message is displayed on the multi-information display in the combination meter assembly to inform the driver of an entry and start system malfunction.
| *1 | Multi-information Display | - | - |
| *1 | Multi-information Display | - | - |
| Displayed Item | Power Source Condition |
|---|---|
| Off | Either of the following conditions is met:
·
The engine has started. ·
The power source is turned off.*1 |
| ACCESSORY | On (ACC) state |
| IGNITION ON | On (IG) state (the engine is not started.) |
| Key Certification Indicator | Engine start ready state*2, *3 |
*1: Excludes the engine start possible condition.
*2: The shift position is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on). (Models with CVT)
*3: The key certification result is OK and the clutch pedal is depressed (the clutch start switch assembly is on). (Models with manual transaxle)