FUNCTION
The airbag cut off switch cylinder sub-assembly can be used if deployment of the SRS front passenger airbag is undesirable.
The airbag cut off switch cylinder sub-assembly can be operated by the mechanical key, which is supplied with the key. Once the airbag cut off switch cylinder sub-assembly is turned to OFF, the SRS front passenger airbag will be disabled, regardless of any collision that may occur.
If the SRS front passenger airbag has been disabled, the AIRBAG OFF indicator light in the telltale light assembly illuminates to inform the driver.
| *1 | Telltale Light Assembly | *2 | Airbag Cut Off Switch Cylinder Sub-assembly |
| *a | OFF Position | *b | ON Position |
| *c | AIRBAG OFF Indicator Light | *d | AIRBAG ON Indicator Light |
The table below shows whether the SRS airbag and seat belt pretensioner for the front passenger are enabled or disabled, and the AIRBAG ON/OFF indicator condition according to the airbag cut off switch cylinder status.
| Item | Airbag Cut Off Switch Cylinder Status | ||
|---|---|---|---|
| ON | OFF | Failure | |
|
○: Enabled -: Disabled *: Even if the airbag cut off switch cylinder is ON, the airbag indicator light turns off after a certain amount of time elapses. |
|||
| Front Passenger Airbag | ○ | - | - |
| Front Passenger Side Airbag | ○ | ○ | ○ |
| Front Passenger Seat Belt Pretensioner | ○ | ○ | ○ |
| AIRBAG ON Indicator Light | Illuminates* | - | - |
| AIRBAG OFF Indicator Light | - | Illuminates | Illuminates |