Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › 2020.07–2020.09
NM36W0E _58 Vehicle Interior _088380 LIGHTING (INT) _0421309 LIGHTING SYSTEM CO CONTROL F

LIGHTING (INT)  LIGHTING SYSTEM  CONTROL  LIGHT CONTROL  


FUNCTION


a.

The illuminated entry system has the following functions:

Function Outline Lights that Operate

*1: HV models

*2: Models with entry and start system

*3: Models without entry and start system

*4: Gasoline models

*5: Models with vanity light assembly

*6: Models with No. 1 interior illumination light assembly

*7: Models with dome light

Actuation Area linked*2
·

When the electrical key transmitter enters any actuation area around the doors, the lights that operate turn on.

·

When the electrical key transmitter leaves all of the actuation areas around the doors, the lights that operate turn off.


·

Map Lights

·

Dome Light*7

·

No. 1 Interior Illumination Light Assembly*6


Door Lock/Unlock linked
·

When any door is unlocked, the lights that operate turn on.

·

When all doors are locked, the lights that operate turn off.


·

Map Lights

·

Dome Light*7

·

No. 1 Interior Illumination Light Assembly*6


·

When all doors are locked, the lights that operate turn off.


·

Engine Switch Illumination Light*4

·

Power Switch Illumination Light*1

·

No. 1 Interior Illumination Light Assembly*6


Door Open/Close-linked
·

When any door is opened, the lights that operate turn on.

·

When all doors are closed, the lights that operate turn off.


·

Map Lights

·

Dome Light*7

·

No. 1 Interior Illumination Light Assembly*6


·

When driver door or front passenger door is opened, the lights that operate turn on.

·

When all doors*A are closed, the lights that operate turn off.


·

Engine Switch Illumination Light*4

·

Power Switch Illumination Light*1


Power Source-linked
·

When the ignition switch is turned from on (ACC) or on (IG) to off, the lights that operate turn on.*2

·

When the ignition switch is turned from ACC or ON to off, the lights that operate turn on.*3


·

Map Lights

·

Dome Light*7

·

Engine Switch Illumination Light*4

·

Power Switch Illumination Light*1

·

No. 1 Interior Illumination Light Assembly*6


·

When the ignition switch is turned from off to on (ACC) or ON (IG), the lights that operate turn off.*2

·

When the ignition switch is turned from off to ACC or ON, the lights that operate turn off.*3


·

Map Lights

·

Dome Light*7

·

Engine Switch Illumination Light*4

·

Power Switch Illumination Light*1


Dimmer When the shift position is not P, the brightness is dimmed.
·

No. 1 Interior Illumination Light Assembly*6


When the parking brake switch assembly is turned off and the vehicle speed is detected, the brightness is dimmed.
Delay When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·

An actuation area-linked function is operated.*2

·

A door unlock-linked function is operated.


·

Map Lights

·

Dome Light*7

·

No. 1 Interior Illumination Light Assembly*6


·

When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:

·

Any door is opened and then all doors are closed when the ignition switch is off.

·

The ignition switch is turned from on (ACC) or on (IG) to off when all the doors are closed.*2

·

The ignition switch is turned from ACC or ON to off when all the doors are closed.*3


·

Map Lights

·

Dome Light*7


Battery Saving
·

When 20 minutes elapse after the power switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.*2

·

When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.*3

·

The battery saving function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

-

The ignition switch is turned on (ACC) or on (IG).*2

-

The ignition switch is turned ACC or ON.*3

-

Any door is opened and closed.

-

Any door is unlocked.

-

The electrical key transmitter enters any exterior actuation area.*2



·

Map Lights

·

Dome Light*7

·

No. 1 Interior Illumination Light Assembly*6


·

When 20 minutes elapse after the power switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.*2

·

When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.*3

·

The battery saving function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

-

The driver door or front passenger door is opened and closed.



·

Engine Switch Illumination Light*4

·

Power Switch Illumination Light*1


Interior Light Auto Cut When no changes occur in the condition of the light switches for 20 minutes, these lights turn off.
·

Map Lights

·

Dome Light*7

·

No. 1 Luggage Compartment Light Assembly

·

Vanity Light Assemblies*5



HINT:

*A: Does not include back door.



b.

Collision-linked Interior Light Control

i.

Condition for turning on the interior lights

·

The air bag sensor assembly detects an impact



ii.

Conditions for turning off the interior lights

·

Approximately 20 minutes elapse after the lights are turned on

·

The interior light off operation is performed


HINT:

The interior lights may not turn on depending on the severity of the impact, the type of collision or due to communication malfunctions.




c.

Customization Function

i.

Settings of some functions can be changed as desired by the user. Refer to the Repair Manual for details.