Home › Drivetrain › K320 (MULTIDRIVE / CVT) › CVT SYSTEM › from 2020.07
NM36W0E _52 Drivetrain _087616 K320 MULTIDRIVE / CVT _0421304 CVT SYSTEM GE GENERAL F

K320 MULTIDRIVE / CVT  CVT SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A K320 Continuously Variable Transaxle (CVT) is used.


b.

A 10-speed sport sequential shiftmatic system is used.


c.

A straight type shift lever is used.


d.

A CVT fluid warmer (transmission oil cooler) is used in the CVT fluid cooling system.


e.

2 discharge port oil pump system is used.


f.

In order to ensure CVT fluid pressure when the Stop and Start System is operating, an oil pump with motor assembly is provided. For details, see the STOP AND START section.*

*: Models with stop and start system



g.

In addition to the conventional metal belt between pulleys that transmits motive force, a gear transmission mechanism similar to an MT that is used when starting off and driving at low speeds has been added.



SPECIFICATION


Torque Converter Assembly
Item Specification
Torque Converter Assembly Type 3-element, 1-step, 2-phase
Stall Torque Ratio 1.79

Continuously Variable Transaxle
Item Specification

*1: Models without shift paddle switch (transmission shift switch assembly)

*2: Models with shift paddle switch (transmission shift switch assembly)

*3: Differential included.

*4: Models without stop and start system

*5: Models with stop and start system

*6: The weight shown is when the transaxle is filled with fluid.

Shift Mechanism Type Pulley and Steel Belt
Forward/Reverse Switching Mechanism Double Pinion Type Planetary Gear
Gear Ratio Forward 3.362
Reverse 3.120
Pulley Ratio Forward 2.236 to 0.447
Reverse -
Final Gear Ratio 3.781
Shift Pattern P - R - N - D - B*1
P - R - N - D - M*2
Fluid Capacity*3 Liters (US qts, Imp. qts) 8.4 (8.9, 7.4)*4
8.1 (8.6, 7.1)*5
Fluid Type Toyota Genuine CVT Fluid FE
Weight (Reference)*6 kg (lb) 81.7 (180.1)*4
82.2 (181.2)*5

Gears and Friction Discs
Item Specification
Gear transmission mechanism No.1 Drive Gear No. of Teeth 27
No.1 Driven Gear No. of Teeth 41
No.2 Drive Gear No. of Teeth 28
No.2 Driven Gear No. of Teeth 62
Planetary Gear Sun Gear No. of Teeth 39
No.1 Pinion Gear No. of Teeth 18
No.2 Pinion Gear No. of Teeth 17
Ring Gear No. of Teeth 81
Reduction Gear Drive Gear No. of Teeth 27
Driven Gear No. of Teeth 32
Final Gear Drive Gear Teeth No. of Teeth 21
Driven Gear Teeth No. of Teeth 67
C1 No.1 Clutch No. of Discs 3
C2 No.2 Clutch No. of Discs 4
B1 No.1 Brake No. of Discs 3


MAIN FEATURES


a.

The K320 CVT has achieved the following characteristics through the use of the items listed below.

Item Fuel Economy Power Efficiency Driveability Quietness Compact and Lightweight

○: Applicable

-: Not applicable

*1: Models with stop and start system

*2: Models with shift paddle switch (transmission shift switch assembly)

Flat Torus Torque Converter ○ ○ - - ○
Synchro Engagement Gear Transmission Mechanism ○ ○ ○ ○ -
Compact Continuously Variable Transmission Mechanism ○ - ○ - ○
Narrow Angle Belt - - ○ - ○
Belt/Gear Transmission Switching Mechanism ○ ○ ○ - ○
Vane Type Oil Pump ○ - - - ○
2 Discharge Port Oil Pump ○ - - - -
Low Viscosity CVT Fluid FE ○ - - - -
Gear Ratio Pressure Control ○ - ○ - -
Oil Pressure Controller Front Arrangement - - ○ - ○
Valve Body Artificial Aging Treatment Added ○ - - - -
Electric CVT Oil Pump*1 ○ - - - ○
Electronic Control System Automatic Shift Control ○ ○ ○ - -
Acceleration Improvement Control - ○ ○ - -
Deceleration Improvement Control - - ○ - -
10-speed Sport Sequential Shiftmatic*2 - - ○ - -
Uphill/Downhill Shift Control - - ○ - -
Engine-CVT Integrated Control ○ ○ ○ - -
Flex Lock-up Control ○ - ○ ○ -
Clutch Capacity Control ○ - - - ○