Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM (for HV Model TMC Made) › from 2020.07
NM36W0E _54 Brake _088478 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0434643 BRAKE CONTROL SYSTEM(for HV Model TMC Made) CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM(for HV Model TMC Made)  CONTROL  VEHICLE STABILITY CONTROL (VSC)  


SYSTEM CONTROL


a.

The ABS and TRC systems help to enhance vehicle stability primarily when braking and accelerating, while the VSC system enhances directional stability of the vehicle. Depending on the road conditions, vehicle speed, sudden steering maneuvers and other outside influences, a strong understeer or oversteer condition can occur. In this situation, the VSC system controls the brake force of each wheel and the drive force of the drive wheels in order to help minimize the understeer or oversteer and enhance vehicle stability.

i.

The VSC system uses signals from various sensors such as the yawrate sensor to detect the vehicle condition in order to control the brake fluid pressure and engine torque.


ii.

When the lateral grip of the tires is exceeded, the following situations can occur.

X102948C04
1.938,2.313 2.25,2.469 0.313,0.156 10 false *a 4.5,2.292 4.813,2.448 0.313,0.156 10 false *b
*a Understeer
·

The front wheels are slipping more than the rear


*b Oversteer
·

The rear wheels are slipping more than the front






b.

Strong understeer judgment

i.

The skid control ECU determines if the vehicle is understeering based on the target yaw rate and the actual yaw rate. When the driver turns the steering wheel, if the actual yaw rate of the vehicle based on the vehicle speed and steering wheel angle is less than the target yaw rate, the skid control ECU determines that the vehicle is understeering due to the insufficient turn rate.

Understeer Judgment
X102926C04
3.396,0.125 3.708,0.323 0.313,0.198 10 *a 4.74,0.823 5.052,1.021 0.313,0.198 10 *b
*a Actual Vehicle Path (Actual Yaw Rate) *b Vehicle Path Based on Target Yaw Rate




c.

Strong Oversteer Judgment

i.

The skid control ECU determines if the vehicle is oversteering based on the slip angle and slip angular velocity. When the slip angle and slip angular velocity are large, the skid control ECU determines that the vehicle is oversteering.

Oversteer Judgment
X102927C04
3.542,0.146 3.854,0.302 0.313,0.156 10 *a 3.927,0.26 4.24,0.417 0.313,0.156 10 *b
*a Path of Center of Gravity of the Vehicle *b Longitudinal Centerline of the Vehicle
V100136

Slip Angle - -




d.

VSC Operation Method

i.

When the skid control ECU determines that the vehicle is understeering, the skid control ECU limits the drive force and controls the brake force of each wheel in order to generate a moment that minimizes the understeer.

Understeer Control
X124151C02
3.594,1.948 5.125,2.354 1.531,0.406 10 false .
V100135

Brake Force
V100136

Control Moment



ii.

When the skid control ECU determines that the vehicle is oversteering, the skid control ECU primarily controls the brake force of the outer wheels to generate a moment toward the outside of the turn in order to minimize the oversteer. This control enhances stability of the vehicle while also reducing speed.

Oversteer Control
X102929C02
3.552,0.698 3.708,0.896 0.156,0.198 10 false .
V100135

Brake Force
V100136

Control Moment