Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM (for HV Model TMMF Made) › from 2020.07
NM36W0E _54 Brake _088478 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0434644 BRAKE CONTROL SYSTEM(for HV Model TMMF Made) GE GENERAL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM(for HV Model TMMF Made)  GENERAL  GENERAL  


OUTLINE


a.

The following brake control systems are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRC), Vehicle Stability Control (VSC), Active Cornering Assist (ACA), hill-start assist control, brake hold, steering cooperative control, emergency brake signal and secondary collision brake.



MAIN FEATURES


a.

Electronically Controlled Brake System

i.

The electronically controlled brake system uses a sensor to detect the amount of brake pedal depression. Based on this, the skid control ECU calculates the braking force and the electric brake booster (brake booster with master cylinder assembly) and brake actuator assembly control the brake fluid pressure of the 4 wheels.


ii.

The electronically controlled brake system cooperates with the hybrid system to optimally control the brake fluid pressure and regenerative braking. This enhances the efficiency of energy regeneration and improves fuel economy.


iii.

When the system is malfunctioning, brake control continues via the use of non-malfunctioning parts. Also, when the system is not operating, the brake fluid pressure generated in the brake master cylinder by the depression of the brake pedal works as a back-up mechanism to ensure braking force.

Control Outline
X147095E01
5.833,2.458 5.948,0.75 5.948,0.75 6.115,0.75 true 0.479,2.313 1.49,2.938 1.01,0.625 10 false Maintains brake fluid pressure for control 0.354,0.229 5.188,0.49 4.833,0.26 10 false Electric Brake Booster (Brake Booster with Master Cylinder Assembly) 4.208,0.969 4.875,1.26 0.667,0.292 10 false - Input 1.979,0.615 2.646,0.844 0.667,0.229 10 false Motor 1.969,1.688 3.823,1.927 1.854,0.24 10 false Motor Rotation Angle Sensor 4.188,1.948 4.885,2.25 0.698,0.302 10 false - Output 4.177,0.625 5.677,0.938 1.5,0.313 10 false Brake Master Cylinder 4.188,1.323 5.229,1.802 1.042,0.479 10 false Generates brake pedal feel 0.479,4.667 2.052,5.063 1.573,0.396 10 false Regenerative Cooperative Control 0.479,0.625 1.396,1.073 0.917,0.448 10 false Brake Booster Control ECU 0.469,1.323 1.323,1.979 0.854,0.656 10 false Regenerative Cooperative Control 0.49,4.313 1.688,4.646 1.198,0.333 10 false Skid Control ECU 2.677,5.875 5.552,6.135 2.875,0.26 10 false - Fluid Pressure Control Portion 2.677,6.25 5.802,6.698 3.125,0.448 10 false Adjusts the fluid pressure in the back of the master cylinder 2.677,7.302 5.469,7.573 2.792,0.271 10 false Switches the oil path when malfunctioning. 2.688,6.896 6.021,7.292 3.333,0.396 10 false - Brake Fluid Pressure Switching Portion for Fail-safe 0.771,7.927 2.583,8.167 1.813,0.24 10 false : Control Signal Flow 0.781,8.313 2.583,8.583 1.802,0.271 10 false : Brake Fluid Pressure Flow 2.677,4.969 3.958,5.198 1.281,0.229 10 false Brake Actuator 2.677,5.344 5.667,5.771 2.99,0.427 10 false Adjusts the fluid pressure of each wheel for ABS, TRC and VSC 6.344,8.052 7.01,8.292 0.667,0.24 10 false Wheel 1.99,2.76 3.958,3.104 1.969,0.344 10 false Relative Displacement Sensor 4.198,2.365 5.427,3.323 1.229,0.958 10 false Supplies brake fluid pressure from the master cylinder to the wheel cylinders 0.49,5.302 1.938,5.927 1.448,0.625 10 false Brake Control Function (Service Brake, ABS, TRC, VSC, etc.) 0.49,7.042 1.99,7.521 1.5,0.479 10 false Detects the brake pedal stroke (Back-up) 6.198,0.656 7.115,1.167 0.917,0.51 10 false Brake Pedal Stroke Sensor 0.49,6.354 2.208,6.729 1.719,0.375 10 false Detects the master cylinder pressure 3.25,8.313 5.167,8.625 1.917,0.313 10 false : CAN Communication Line 1.979,0.969 4.146,1.542 2.167,0.573 10 false Assists the brake pedal depression force applied by the driver 1.969,2.042 3.938,2.438 1.969,0.396 10 false Detects the rotation angle of the motor 1.979,3.115 3.896,3.573 1.917,0.458 10 false Detects the amount of relative displacement due to the assist 6.125,1.406 6.969,2.115 0.844,0.708 10 false - Detects the brake pedal stroke 0.458,3.198 1.573,3.823 1.115,0.625 10 false Detects the brake pedal stroke (Main) 2.563,4.25 5.094,4.583 2.531,0.333 10 false Brake Actuator Assembly


iv.

Brake control apportions brake force to the hydraulic brake system and regenerative brake system at varying vehicle speeds as follows.

X147139E01
3.323,0.042 5.219,0.573 1.896,0.531 10 false Braking Force Based on Brake Pedal Depression by Driver 1.313,1.688 1.823,2.115 0.51,0.427 10 false Braking Force 1.458,3.26 2.583,3.5 1.125,0.24 10 false Start of Braking 5.094,3.26 6.219,3.5 1.125,0.24 10 false Stop 2.719,3.406 4.875,3.635 2.156,0.229 10 false Example of Cooperative Control 3.635,2.271 5.104,2.646 1.469,0.375 10 true Braking Force by Motor (Energy Regeneration) 2.99,1.271 4.094,1.781 1.104,0.51 10 false Hydraulic Braking Force

X147140E01
2.083,0.583 2.25,0.583 2.25,0.583 2.583,0.948 true 5.583,0.604 5.75,0.604 5.75,0.604 6.031,1 true 2,3.917 2.167,3.917 2.167,3.917 2.49,4.323 true 4.667,4.125 5.958,4.365 1.292,0.24 10 false Hydraulic Brake 4.667,4.635 5.958,4.875 1.292,0.24 10 false Motor Brake 0.438,0.708 0.802,0.958 0.365,0.25 10 false High 3.969,0.708 4.333,0.958 0.365,0.25 10 false High 0.438,3.99 0.802,4.24 0.365,0.25 10 false High 0.344,1.26 0.844,1.698 0.5,0.438 10 false Braking Force 3.865,1.219 4.365,1.656 0.5,0.438 10 false Braking Force 0.333,4.594 0.833,5.031 0.5,0.438 10 false Braking Force 1.25,2.219 2.521,2.594 1.271,0.375 10 false Depression Force of Brake Pedal 4.771,2.229 6.042,2.604 1.271,0.375 10 false Depression Force of Brake Pedal 1.292,5.552 2.563,5.927 1.271,0.375 10 false Depression Force of Brake Pedal 2.781,2.292 3.146,2.542 0.365,0.25 10 false High 6.313,2.302 6.677,2.552 0.365,0.25 10 false High 2.781,5.625 3.146,5.875 0.365,0.25 10 false High 1.76,5 3.031,5.375 1.271,0.375 10 false Hydraulic Brake 2.021,1.469 3.292,1.844 1.271,0.375 10 false Hydraulic Brake 5.896,1.26 7.021,1.531 1.125,0.271 10 false Hydraulic Brake 1.219,0.49 2.052,0.979 0.833,0.49 10 false Total Braking Force 4.719,0.521 5.552,1.01 0.833,0.49 10 false Total Braking Force 1.146,3.813 1.979,4.302 0.833,0.49 10 false Total Braking Force 1.375,3.104 2.646,3.479 1.271,0.375 10 false At high speeds 4.625,3.104 6.188,3.448 1.563,0.344 10 false At mid or low speeds 0.552,6.5 3.74,6.917 3.188,0.417 10 false When shift position is in N or at low speeds 1.229,7.229 6.427,7.531 5.198,0.302 10 false Brake force by hydraulic and regenerative brake system at different vehicle speeds




PRECAUTION


a.

ABS

i.

The ABS system cannot increase the performance limit of the tires. Always drive safely and be aware of the vehicle speed and distance to other vehicles.


ii.

Any non-standard components such as non-standard tires that are installed may have a negative effect on the ABS function.


iii.

When braking using ABS, the braking distance may be longer than vehicles without ABS in the following conditions:

·

When driving on a dirt road or a road covered with fresh snow

·

When using tire chains

·

When driving over a joint in the road surface

·

When driving on a rough road such as an unpaved or stone-paved road




b.

Brake Assist

i.

Brake assist cannot increase the performance limit of the fundamental brake system. Always drive safely and be aware of the vehicle speed and distance to other vehicles.



c.

TRC, VSC

i.

The TRC and VSC systems enhance traction and vehicle stability. Do not disable the TRC or VSC functions unless necessary.


ii.

The TRC and VSC systems cannot increase the performance limit of the tires. Always drive the vehicle carefully in conditions in which drive wheel traction or vehicle stability may be lost.



d.

Active Cornering Assist (ACA)

i.

Active Cornering Assist (ACA) cannot increase the performance limit or innate maneuverability of the vehicle itself.


ii.

Do not overly rely on Active Cornering Assist (ACA). Active Cornering Assist (ACA) may not operate effectively when accelerating down slopes or driving on slippery road surfaces.


iii.

When Active Cornering Assist (ACA) frequently operates, Active Cornering Assist (ACA) may temporarily stop operating to ensure proper operation of the brakes, TRC and VSC.



e.

Hill-start Assist Control

i.

Hill-start assist control is not intended to keep the vehicle stationary on a hill for a prolonged period. As hill-start assist control only prevents the vehicle from rolling backwards for 2 seconds after the brake pedal is released, perform start-off within this period.


ii.

When hill-start assist control is operating and the ignition switch is turned off, hill-start assist control will be canceled without warning.


iii.

Hill-start assist control prevents the vehicle from rolling backwards by controlling the brake force to the 4 wheels. However, the vehicle may not remain stationary when on an extremely steep slope or a low friction surface such as ice.



f.

Brake Hold

i.

Brake hold is not intended to keep the vehicle parked for a prolonged period, such as the parking brake is designed to do.


ii.

When brake hold is operating and the ignition switch is turned off, brake hold will be canceled without warning.


iii.

If brake hold does not operate even though the vehicle is stopped, firmly depress the brake pedal. If brake hold still does not operate, check the operating conditions.


iv.

It may not be possible for brake hold to keep the vehicle stationary on a steep or slippery road.