Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM (for HV Model TMMF Made) › from 2020.07
NM36W0E _54 Brake _088478 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0434644 BRAKE CONTROL SYSTEM(for HV Model TMMF Made) DE DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM(for HV Model TMMF Made)  DETAILS  BRAKE ACTUATOR  


CONSTRUCTION


a.

The brake actuator assembly consists of the brake actuator portion and skid control ECU.

X147101C01
4.5,1.083 4.917,0.667 4.917,0.667 5.083,0.667 true 2.083,1.25 2.25,1.25 2.25,1.25 2.667,1.667 true 5.156,0.563 5.469,0.719 0.313,0.156 10 false *1 1.885,1.146 2.198,1.302 0.313,0.156 10 false *a
*1 Skid Control ECU - -
*a Brake Actuator Portion - -



b.

The brake actuator portion consists of 2 master cylinder cut solenoid valves, 2 reservoir cut solenoid valves, 4 pressure holding solenoid valves, 4 pressure reduction solenoid valves, 2 pumps, 2 reservoirs and a master cylinder pressure sensor.

Brake Fluid Hydraulic Circuit Diagram
X147123C01
5.688,1.198 5.854,0.948 5.854,0.948 6.021,0.948 true 1.25,0.292 1.417,0.292 1.417,0.292 1.667,0.458 true 1.125,0.917 1.292,0.917 1.292,0.917 1.542,1.083 true 0.688,0.156 1,0.313 0.313,0.156 10 false *1 1.052,0.188 1.365,0.344 0.313,0.156 10 false *2 0.948,0.813 1.26,0.969 0.313,0.156 10 false *3 6.094,0.844 6.406,1 0.313,0.156 10 false *4 0.677,3.073 0.99,3.229 0.313,0.156 10 false *5 5.552,3.208 5.865,3.365 0.313,0.156 10 false *6 1.271,4.625 1.583,4.781 0.313,0.156 10 false *7 2.594,4.625 2.906,4.781 0.313,0.156 10 false *8 1.542,6.01 1.854,6.167 0.313,0.156 10 false *9 1.479,7.198 1.948,7.354 0.469,0.156 10 false *10 3.531,7.375 4,7.531 0.469,0.156 10 false *11 3.521,8.313 3.99,8.469 0.469,0.156 10 false *12 1.458,8.438 1.927,8.594 0.469,0.156 10 false *13 2.406,8.438 2.875,8.594 0.469,0.156 10 false *14 4.573,8.438 5.042,8.594 0.469,0.156 10 false *15 5.531,8.438 6,8.594 0.469,0.156 10 false *16 2.406,7.198 2.875,7.354 0.469,0.156 10 false *10 4.604,7.198 5.073,7.354 0.469,0.156 10 false *10 5.521,7.198 5.99,7.354 0.469,0.156 10 false *10 2.458,6.01 2.771,6.167 0.313,0.156 10 false *9 4.656,6.01 4.969,6.167 0.313,0.156 10 false *9 5.573,6.01 5.885,6.167 0.313,0.156 10 false *9 5.844,4.625 6.156,4.781 0.313,0.156 10 false *7 4.521,4.625 4.833,4.781 0.313,0.156 10 false *8
*1 Electric Brake Booster (Brake Booster with Master Cylinder Assembly) *2 Brake Master Cylinder Reservoir Assembly
*3 Master Cylinder *4 Brake Pedal Stroke Sensor Assembly
*5 Brake Actuator Assembly *6 Master Cylinder Pressure Sensor
*7 Master Cylinder Cut Solenoid Valve *8 Reservoir Cut Solenoid Valve
*9 Pressure Holding Solenoid Valve *10 Pressure Reduction Solenoid Valve
*11 Pump *12 Reservoir
*13 Front Brake Caliper *14 Rear Brake Caliper
*15 Rear Brake Caliper *16 Front Brake Caliper




OPERATION


a.

ABS and EBD

i.

Based on the signals received from the 4 speed sensors, the skid control ECU calculates the speed of each wheel, and checks the wheel slipping conditions. In accordance with the slipping condition, the skid control ECU controls each solenoid valve in the brake actuator assembly in order to adjust the fluid pressure of each wheel cylinder in the following 3 modes: pressure increase, pressure holding and pressure reduction modes.

X147143C01
0.417,0.219 2.563,4.51 2.146,4.292 2.74,0.219 4.771,4.51 2.031,4.292 4.865,0.219 6.938,4.51 2.073,4.292 1.583,1.573 1.75,0.75 1.75,0.75 1.917,0.75 true 0.75,3 0.917,3 0.917,3 1.344,3.292 true 1.979,0.646 2.292,0.802 0.313,0.156 10 false *1 0.552,2.896 0.865,3.052 0.313,0.156 10 false *2 1.417,2.354 1.729,2.51 0.313,0.156 10 false *3 1.427,4.031 1.74,4.188 0.313,0.156 10 false *4 0.521,0.281 0.833,0.438 0.313,0.156 10 false *a 2.854,0.292 3.167,0.448 0.313,0.156 10 false *b 4.99,0.292 5.302,0.448 0.313,0.156 10 false *c 2.115,4.25 2.427,4.406 0.313,0.156 10 false *d 4.927,2.771 5.24,2.927 0.313,0.156 10 false *e 3.625,2.354 3.938,2.552 0.313,0.198 10 false *3 5.771,2.344 6.083,2.542 0.313,0.198 10 false *3 3.646,4.031 3.958,4.229 0.313,0.198 10 false *4 5.771,4.021 6.083,4.219 0.313,0.198 10 false *4 6.51,4.198 6.823,4.354 0.313,0.156 10 false *f
*1 Port A *2 Port B
*3 Pressure Holding Solenoid Valve *4 Pressure Reduction Solenoid Valve
*a Increase Mode *b Holding Mode
*c Reduction Mode *d to Wheel Cylinder
*e to Reservoir and Pump *f from Wheel Cylinder


ABS and EBD Control Operation
Not Activated Normal Braking - -
Activated Increase Mode Holding Mode Reduction Mode
Pressure Holding Solenoid Valve (Port A) Off (Open) On (Close) On (Close)
Pressure Reduction Solenoid Valve (Port B) Off (Close) Off (Close) On (Open)
Wheel Cylinder Pressure Increases Holds Reduces



b.

Brake Assist

i.

In the event of emergency braking, the skid control ECU determines the driver's intention based on the speed of the pressure increase in the master cylinder determined by the master cylinder pressure sensor signal. If the skid control ECU judges the need for additional brake assist, pressure is generated by the pump in the brake actuator assembly and directed to the wheel cylinder to apply a large amount of fluid pressure.

Brake Assist Control Operation
X147144C01
3.26,5.229 3.438,5.375 3.438,5.375 3.438,6.063 true 3.979,5.24 3.823,5.375 3.823,5.375 3.823,6.063 true 3.083,7.25 3.25,7.25 3.25,7.25 3.375,6.615 true 4.167,7.25 4,7.25 4,7.25 3.896,6.594 true 0.583,2.583 0.75,2.583 0.75,2.583 1.323,2.729 true 2.167,2.5 2.333,2.5 2.333,2.5 2.646,2.75 true 4.604,2.74 4.917,2.5 4.917,2.5 5.083,2.5 true 5.938,2.75 6.5,2.583 6.5,2.583 6.667,2.583 true 0.583,4.083 0.75,4.083 0.75,4.083 1.573,4.219 true 2.083,4.917 2.25,4.917 2.25,4.917 2.51,4.229 true 5.167,4.917 5,4.917 5,4.917 4.729,4.219 true 5.656,4.229 6.5,4.083 6.5,4.083 6.667,4.083 true 0.583,5.25 0.75,5.25 0.75,5.25 1.583,5.417 true 1.917,6.417 2.083,6.417 2.083,6.417 2.5,5.438 true 5.333,6.417 5.167,6.417 5.167,6.417 4.719,5.417 true 5.656,5.417 6.5,5.25 6.5,5.25 6.667,5.25 true 3.542,0.521 3.854,0.677 0.313,0.156 10 false *1 0.354,2.479 0.667,2.792 0.313,0.313 10 false (A) 5.552,1.76 5.865,1.917 0.313,0.156 10 false *3 3.375,6.083 3.688,6.24 0.313,0.156 10 false *4 2.906,7.146 3.219,7.302 0.313,0.156 10 false *5 1.49,7.385 1.802,7.542 0.313,0.156 10 false *6 2.531,7.375 2.844,7.531 0.313,0.156 10 false *7 4.615,7.385 4.927,7.542 0.313,0.156 10 false *8 5.698,7.365 6.01,7.521 0.313,0.156 10 false *9 3.771,6.073 4.083,6.229 0.313,0.156 10 false *4 4.24,7.146 4.552,7.302 0.313,0.156 10 false *5 0.698,1.5 1.01,1.656 0.313,0.156 10 false *2 1.927,2.396 2.24,2.708 0.313,0.313 10 false (B) 5.146,2.406 5.458,2.719 0.313,0.313 10 false (C) 6.729,2.479 7.042,2.792 0.313,0.313 10 false (D) 1.229,3.323 1.542,3.635 0.313,0.313 10 false (1) 2.531,3.323 2.844,3.635 0.313,0.313 10 false (2) 4.49,3.344 4.802,3.656 0.313,0.313 10 false (3) 5.813,3.323 6.125,3.635 0.313,0.313 10 false (4) 0.354,3.979 0.667,4.292 0.313,0.313 10 false (E) 1.865,4.813 2.177,5.125 0.313,0.313 10 false (F) 5.229,4.813 5.542,5.125 0.313,0.313 10 false (G) 1.51,4.823 1.823,5.135 0.313,0.313 10 false (5) 2.438,4.813 2.75,5.125 0.313,0.313 10 false (6) 4.604,4.823 4.917,5.135 0.313,0.313 10 false (7) 5.542,4.813 5.854,5.125 0.313,0.313 10 false (8) 1.49,6.01 1.802,6.323 0.313,0.313 10 false (9) 2.427,5.99 2.74,6.302 0.313,0.313 10 false (10) 4.594,6 4.906,6.313 0.313,0.313 10 false (11) 5.49,6.01 5.802,6.323 0.313,0.313 10 false (12) 6.729,3.969 7.042,4.281 0.313,0.313 10 false (H) 0.396,5.146 0.708,5.458 0.313,0.313 10 false (I) 1.708,6.313 2.021,6.625 0.313,0.313 10 false (J) 5.396,6.313 5.708,6.625 0.313,0.313 10 false (K) 6.729,5.146 7.042,5.458 0.313,0.313 10 false (L)
*1 Electric Brake Booster (Brake Booster with Master Cylinder Assembly) *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Reservoir *6 Front Brake Caliper
*7 Rear Brake Caliper *8 Rear Brake Caliper
*9 Front Brake Caliper - -


Brake Assist Control Operation
Item Port Brake Assist Not Activated Brake Assist Activated

*: Hydraulic pressure is controlled by continuously cycling the solenoid valves between open and closed, according to the operating conditions.

Master Cylinder Cut Solenoid Valve (1), (4) (A), (D) Off (Open) On*
Reservoir Cut Solenoid Valve (2), (3) (B), (C) Off (Closed) On (Open)
Front Brakes Pressure Holding Solenoid Valve (5), (8) (E), (H) Off (Open) Off (Open)
Pressure Reduction Solenoid Valve (9), (12) (I), (L) Off (Closed) Off (Closed)
Rear Brakes Pressure Holding Solenoid Valve (6), (7) (F), (G) Off (Open) Off (Open)
Pressure Reduction Solenoid Valve (10), (11) (J), (K) Off (Closed) Off (Closed)
Pump Off On


ii.

When a malfunction occurs in the electric brake booster (brake booster with master cylinder assembly) and assist is not possible, the brake actuator assembly controls the brake fluid pressure based on information from the brake pedal stroke sensor assembly in order to amplify the depression force applied by the driver. The operation when a malfunction occurs in the electric brake booster (brake booster with master cylinder assembly) is the same as when brake assist is operating.



c.

TRC

i.

The fluid pressure generated by the pump is regulated by the master cylinder cut solenoid valve to the required pressure. As a result, the wheel cylinders of the drive wheels are controlled in the following 3 modes: pressure increase, pressure holding and pressure reduction modes to control the slippage of the drive wheels. Each pressure holding solenoid valve and the pressure reduction solenoid valve is turned on or off in accordance with the ABS and EBD operation patterns.

TRC Control Operation
X147145C01
0.583,2.5 0.75,2.5 0.75,2.5 1.323,2.75 true 2.167,2.5 2.333,2.5 2.333,2.5 2.646,2.74 true 4.594,2.74 4.917,2.5 4.917,2.5 5.083,2.5 true 5.917,2.74 6.5,2.5 6.5,2.5 6.667,2.5 true 0.583,3.917 0.75,3.917 0.75,3.917 1.583,4.219 true 2.083,4.917 2.25,4.917 2.25,4.917 2.51,4.219 true 5.167,4.917 5,4.917 5,4.917 4.708,4.229 true 5.635,4.229 6.5,3.917 6.5,3.917 6.667,3.917 true 0.583,5.167 0.75,5.167 0.75,5.167 1.594,5.406 true 1.917,6.417 2.083,6.417 2.083,6.417 2.521,5.406 true 5.25,6.417 5.083,6.417 5.083,6.417 4.719,5.427 true 5.646,5.417 6.5,5.167 6.5,5.167 6.667,5.167 true 3.438,6.063 3.438,5.375 3.438,5.375 3.26,5.24 true 3.802,6.073 3.802,5.385 3.802,5.385 3.979,5.24 true 3.365,6.604 3.25,7.25 3.25,7.25 3.083,7.25 true 3.875,6.604 4,7.25 4,7.25 4.167,7.25 true 3.521,0.531 3.833,0.688 0.313,0.156 10 false *1 0.646,1.531 0.958,1.688 0.313,0.156 10 false *2 5.531,1.792 5.844,1.948 0.313,0.156 10 false *3 3.354,6.104 3.667,6.26 0.313,0.156 10 false *4 2.896,7.146 3.208,7.302 0.313,0.156 10 false *5 1.51,7.271 1.823,7.427 0.313,0.156 10 false *6 2.448,7.271 2.76,7.427 0.313,0.156 10 false *7 4.604,7.25 4.917,7.406 0.313,0.156 10 false *8 5.583,7.229 5.896,7.385 0.313,0.156 10 false *9 0.344,2.396 0.583,2.667 0.24,0.271 10 false (A) 1.927,2.396 2.188,2.625 0.26,0.229 10 false (B) 5.146,2.406 5.385,2.667 0.24,0.26 10 false (C) 6.74,2.396 7,2.625 0.26,0.229 10 false (D) 1.26,3.344 1.573,3.5 0.313,0.156 10 false (1) 2.583,3.344 2.896,3.5 0.313,0.156 10 false (2) 4.531,3.333 4.844,3.49 0.313,0.156 10 false (3) 5.833,3.333 6.146,3.49 0.313,0.156 10 false (4) 0.344,3.813 0.719,4.063 0.375,0.25 10 false (E) 1.854,4.813 2.083,5.052 0.229,0.24 10 false (F) 5.229,4.813 5.531,5.042 0.302,0.229 10 false (G) 6.729,3.802 7.073,4.042 0.344,0.24 10 false (H) 0.396,5.063 0.74,5.302 0.344,0.24 10 false (I) 1.708,6.313 1.948,6.5 0.24,0.188 10 false (J) 5.302,6.313 5.604,6.552 0.302,0.24 10 false (K) 6.729,5.063 7.052,5.365 0.323,0.302 10 false (L) 1.542,4.823 1.854,4.979 0.313,0.156 10 false (5) 2.448,4.833 2.76,4.99 0.313,0.156 10 false (6) 4.646,4.833 4.958,4.99 0.313,0.156 10 false (7) 5.573,4.833 5.885,4.99 0.313,0.156 10 false (8) 1.542,6.052 1.854,6.208 0.313,0.156 10 false (9) 2.417,6.01 2.729,6.167 0.313,0.156 10 false (10) 4.604,6.01 4.917,6.167 0.313,0.156 10 false (11) 5.542,6.021 5.854,6.177 0.313,0.156 10 false (12) 3.719,6.104 4.031,6.26 0.313,0.156 10 false *4 4.25,7.146 4.563,7.302 0.313,0.156 10 false *5
*1 Electric Brake Booster (Brake Booster with Master Cylinder Assembly) *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Reservoir *6 Front Brake Caliper
*7 Rear Brake Caliper *8 Rear Brake Caliper
*9 Front Brake Caliper - -


TRC Control Operation*1
Item Port TRC Not Activated TRC Activated
Increase Mode Holding Mode Reduction Mode

*1: This table shows the brake control operation of the 2WD. In the case of the 4WD/AWD, the rear brakes are also controlled with the same operation as the front brake.

*2: The solenoid valve switches the hydraulic pressure between "open" and "closed" in accordance with the operating conditions by adjusting continually.

Master Cylinder Cut Solenoid Valve (1), (4) (A), (D) Off (Open) On*2 On*2 On*2
Reservoir Cut Solenoid Valve (2), (3) (B), (C) Off (Closed) On (Open) On (Open) On (Open)
Front Brakes Pressure Holding Solenoid Valve (5), (8) (E), (H) Off (Open) Off (Open) On (Closed) On (Closed)
Pressure Reduction Solenoid Valve (9), (12) (I), (L) Off (Closed) Off (Closed) Off (Closed) On (Open)
Brake Wheel Cylinder Pressure - - - Increases Holds Reduces
Rear Brakes Pressure Holding Solenoid Valve (6), (7) (F), (G) Off (Open) On (Closed) On (Closed) On (Closed)
Pressure Reduction Solenoid Valve (10), (11) (J), (K) Off (Closed) On (Open) On (Open) On (Open)
Brake Wheel Cylinder Pressure - - - - - -
Pump Off On On On



d.

VSC

i.

The VSC, by the way of solenoid valves, controls fluid pressure generated by the pump and applies it to the brake wheel cylinder of each wheel in the following 3 modes: pressure increase, pressure holding and pressure reduction modes. As a result, the tendency of front wheel skid or rear wheel skid is controlled.


ii.

In understeer restraining control, the brakes of the front and rear wheels on the inner circle of the turn are applied. Also, depending on whether the brake is on or off and also depending on the condition of the vehicle, there are circumstances in which the brake might not be applied to a wheel even if the wheel is targeted for braking. The following diagram shows the hydraulic circuit in pressure increase mode as it controls a front wheel skid condition while the vehicle is making a right turn. In other operating modes, the pressure holding valve and the pressure reduction valve are turned on or off in accordance with the ABS and EBD operation patterns.

VSC Operation (Understeer Restraining Control)
X147146C01
3.083,7.25 3.25,7.25 3.25,7.25 3.375,6.615 true 4.167,7.25 4,7.25 4,7.25 3.875,6.604 true 3.271,5.219 3.427,5.375 3.427,5.375 3.427,6.042 true 3.979,5.229 3.833,5.375 3.833,5.375 3.833,6.042 true 0.583,2.417 0.75,2.417 0.75,2.417 1.313,2.74 true 2.167,2.5 2.333,2.5 2.333,2.5 2.646,2.74 true 4.604,2.75 4.917,2.5 4.917,2.5 5.083,2.5 true 5.938,2.74 6.5,2.417 6.5,2.417 6.667,2.417 true 0.583,4 0.75,4 0.75,4 1.583,4.219 true 2.083,4.917 2.25,4.917 2.25,4.917 2.5,4.219 true 5.167,4.917 5,4.917 5,4.917 4.729,4.219 true 5.667,4.229 6.5,3.917 6.5,3.917 6.667,3.917 true 0.583,5.083 0.75,5.083 0.75,5.083 1.583,5.417 true 1.917,6.417 2.083,6.417 2.083,6.417 2.521,5.417 true 5.333,6.417 5.167,6.417 5.167,6.417 4.729,5.417 true 5.667,5.417 6.5,5.083 6.5,5.083 6.667,5.083 true 3.531,0.51 3.844,0.667 0.313,0.156 10 false *1 0.688,1.438 1,1.594 0.313,0.156 10 false *2 5.552,1.76 5.865,1.917 0.313,0.156 10 false *3 3.375,6.073 3.688,6.229 0.313,0.156 10 false *4 4.229,7.156 4.542,7.313 0.313,0.156 10 false *5 1.458,7.313 1.771,7.469 0.313,0.156 10 false *6 2.531,7.292 2.844,7.448 0.313,0.156 10 false *7 4.573,7.323 4.885,7.479 0.313,0.156 10 false *8 5.625,7.313 5.938,7.469 0.313,0.156 10 false *9 2.906,7.146 3.219,7.302 0.313,0.156 10 false *5 3.781,6.073 4.094,6.229 0.313,0.156 10 false *4 0.344,2.323 0.646,2.646 0.302,0.323 10 false (A) 1.938,2.406 2.24,2.729 0.302,0.323 10 false (B) 5.146,2.406 5.448,2.729 0.302,0.323 10 false (C) 6.719,2.323 7.021,2.646 0.302,0.323 10 false (D) 0.354,3.906 0.656,4.229 0.302,0.323 10 false (E) 1.854,4.823 2.156,5.146 0.302,0.323 10 false (F) 5.24,4.823 5.542,5.146 0.302,0.323 10 false (G) 6.729,3.823 7.031,4.146 0.302,0.323 10 false (H) 0.406,4.99 0.708,5.313 0.302,0.323 10 false (I) 1.719,6.323 2.021,6.646 0.302,0.323 10 false (J) 5.406,6.323 5.708,6.646 0.302,0.323 10 false (K) 6.729,4.99 7.031,5.313 0.302,0.323 10 false (L) 1.271,3.323 1.583,3.573 0.313,0.25 10 false (1) 2.583,3.323 2.896,3.573 0.313,0.25 10 false (2) 4.51,3.323 4.823,3.573 0.313,0.25 10 false (3) 5.833,3.313 6.146,3.563 0.313,0.25 10 false (4) 1.531,4.823 1.844,5.073 0.313,0.25 10 false (5) 2.448,4.823 2.76,5.073 0.313,0.25 10 false (6) 4.646,4.813 4.958,5.063 0.313,0.25 10 false (7) 5.573,4.813 5.885,5.063 0.313,0.25 10 false (8) 1.531,6.01 1.844,6.26 0.313,0.25 10 false (9) 2.448,6 2.76,6.25 0.313,0.25 10 false (10) 4.615,6 4.927,6.25 0.313,0.25 10 false (11) 5.552,6.021 5.865,6.271 0.313,0.25 10 false (12)
*1 Electric Brake Booster (Brake Booster with Master Cylinder Assembly) *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Reservoir *6 Front Brake Caliper
*7 Rear Brake Caliper *8 Rear Brake Caliper
*9 Front Brake Caliper - -


VSC Control Operation (During Understeer)
Item Port VSC Not Activated VSC Activated
Increase Mode Holding Mode Reduction Mode

*: Hydraulic pressure is controlled by continuously cycling the solenoid valves between open and closed, according to the operating conditions.

Master Cylinder Cut Solenoid Valve (1), (4) (A), (D) Off (Open) On* On* On*
Reservoir Cut Solenoid Valve (2), (3) (B), (C) Off (Closed) On (Open) On (Open) On (Open)
Front Brake Pressure Holding Solenoid Valve (5) (E) Off (Open) Off (Open) On (Closed) On (Closed)
(8) (H) Off (Open) On (Closed) On (Closed) On (Closed)
Pressure Reduction Solenoid Valve (9) (I) Off (Closed) Off (Closed) Off (Closed) On (Open)
(12) (L) Off (Closed) Off (Closed) Off (Closed) Off (Closed)
Brake Wheel Cylinder Pressure Right - - Increases Holds Reduces
Left - - - - -
Rear Brake Pressure Holding Solenoid Valve (6) (F) Off (Open) On (Closed) On (Closed) On (Closed)
(7) (G) Off (Open) Off (Open) On (Closed) On (Closed)
Pressure Reduction Solenoid Valve (10) (J) Off (Closed) Off (Closed) Off (Closed) Off (Closed)
(11) (K) Off (Closed) Off (Closed) Off (Closed) On (Open)
Brake Wheel Cylinder Pressure Right - - Increases Holds Reduces
Left - - - - -
Pump Off On On On


iii.

In oversteer restraining control, the brakes of the front and rear wheels on the outer circle of the turn are applied. Also, depending on whether the brake is on or off and also depending on the condition of the vehicle, there are circumstances in which the brake might not be applied to a wheel even if the wheel is targeted for braking. The following diagram shows the hydraulic circuit in pressure increase mode, as it controls the rear wheel skid condition while the vehicle is making a right turn. In other operating modes, the pressure holding valve and the pressure reduction valve are turned on or off in accordance with the ABS and EBD operation patterns.

VSC Operation (Oversteer Restraining Control)
X147147C01
0.583,2.417 0.75,2.417 0.75,2.417 1.333,2.74 true 2.167,2.5 2.333,2.5 2.333,2.5 2.656,2.75 true 4.594,2.75 4.917,2.5 4.917,2.5 5.083,2.5 true 5.906,2.75 6.5,2.417 6.5,2.417 6.667,2.417 true 0.583,3.833 0.75,3.833 0.75,3.833 1.594,4.219 true 2.083,4.917 2.25,4.917 2.25,4.917 2.51,4.229 true 5.167,4.917 5,4.917 5,4.917 4.708,4.229 true 5.635,4.208 6.5,3.833 6.5,3.833 6.667,3.833 true 0.583,5.083 0.75,5.083 0.75,5.083 1.594,5.417 true 1.917,6.417 2.083,6.417 2.083,6.417 2.521,5.396 true 5.646,5.417 6.5,5.083 6.5,5.083 6.667,5.083 true 5.25,6.417 5.083,6.417 5.083,6.417 4.708,5.417 true 3.438,6.052 3.438,5.396 3.438,5.396 3.26,5.229 true 3.813,6.052 3.813,5.396 3.813,5.396 4,5.229 true 3.365,6.615 3.25,7.25 3.25,7.25 3.083,7.25 true 3.865,6.604 4,7.25 4,7.25 4.167,7.25 true 3.542,0.5 3.854,0.656 0.313,0.156 10 false *1 0.667,1.49 0.979,1.646 0.313,0.156 10 false *2 5.552,1.771 5.865,1.927 0.313,0.156 10 false *3 3.385,6.104 3.698,6.26 0.313,0.156 10 false *4 2.917,7.156 3.229,7.313 0.313,0.156 10 false *5 1.479,7.26 1.792,7.417 0.313,0.156 10 false *6 2.542,7.25 2.854,7.406 0.313,0.156 10 false *7 4.594,7.24 4.906,7.396 0.313,0.156 10 false *8 5.656,7.24 5.969,7.396 0.313,0.156 10 false *9 0.344,2.323 0.656,2.479 0.313,0.156 10 false (A) 1.906,2.406 2.219,2.563 0.313,0.156 10 false (B) 5.156,2.406 5.469,2.563 0.313,0.156 10 false (C) 6.729,2.323 7.042,2.479 0.313,0.156 10 false (D) 1.292,3.333 1.552,3.5 0.26,0.167 10 false (1) 2.594,3.333 2.865,3.5 0.271,0.167 10 false (2) 4.51,3.323 4.771,3.49 0.26,0.167 10 false (3) 5.844,3.323 6.104,3.49 0.26,0.167 10 false (4) 1.521,4.833 1.781,5 0.26,0.167 10 false (5) 2.469,4.823 2.729,4.99 0.26,0.167 10 false (6) 4.646,4.823 4.906,4.99 0.26,0.167 10 false (7) 5.583,4.823 5.844,4.99 0.26,0.167 10 false (8) 0.354,3.74 0.635,3.927 0.281,0.188 10 false (E) 1.854,4.823 2.167,4.979 0.313,0.156 10 false (F) 5.24,4.823 5.552,4.979 0.313,0.156 10 false (G) 6.729,3.74 7.042,3.896 0.313,0.156 10 false (H) 1.698,6.323 2.01,6.479 0.313,0.156 10 false (J) 0.406,4.99 0.719,5.146 0.313,0.156 10 false (I) 5.313,6.323 5.625,6.479 0.313,0.156 10 false (K) 6.719,4.99 7.031,5.146 0.313,0.156 10 false (L) 1.521,5.99 1.781,6.156 0.26,0.167 10 false (9) 2.427,5.99 2.688,6.167 0.26,0.177 10 false (10) 4.604,5.99 4.865,6.156 0.26,0.167 10 false (11) 5.542,5.99 5.802,6.156 0.26,0.167 10 false (12) 3.719,6.104 4.031,6.26 0.313,0.156 10 false *4 4.229,7.156 4.542,7.313 0.313,0.156 10 false *5
*1 Electric Brake Booster (Brake Booster with Master Cylinder Assembly) *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Reservoir *6 Front Brake Caliper
*7 Rear Brake Caliper *8 Rear Brake Caliper
*9 Front Brake Caliper - -


VSC Control Operation (During Oversteer)
Item Port VSC Not Activated VSC Activated
Increase Mode Holding Mode Reduction Mode

*: Hydraulic pressure is controlled by continuously cycling the solenoid valves between open and closed, according to the operating conditions.

Master Cylinder Cut Solenoid Valve (1), (4) (A), (D) Off (Open) On* On* On*
Reservoir Cut Solenoid Valve (2), (3) (B), (C) Off (Closed) On (Open) On (Open) On (Open)
Front Brake Pressure Holding Solenoid Valve (5) (E) Off (Open) On (Closed) On (Closed) On (Closed)
(8) (H) Off (Open) Off (Open) On (Closed) On (Closed)
Pressure Reduction Solenoid Valve (9) (I) Off (Closed) Off (Closed) Off (Closed) Off (Closed)
(12) (L) Off (Closed) Off (Closed) Off (Closed) On (Open)
Brake Wheel Cylinder Pressure Right - - - - -
Left - - Increases Holds Reduces
Rear Brake Pressure Holding Solenoid Valve (6) (F) Off (Open) Off (Open) On (Closed) On (Closed)
(7) (G) Off (Open) On (Closed) On (Closed) On (Closed)
Pressure Reduction Solenoid Valve (10) (J) Off (Closed) Off (Closed) Off (Closed) On (Open)
(11) (K) Off (Closed) Off (Closed) Off (Closed) Off (Closed)
Brake Wheel Cylinder Pressure Right - - - - -
Left - - Increases Holds Reduces
Pump Off On On On



e.

Active Cornering Assist (ACA)

i.

Active Cornering Assist (ACA), by way of solenoid valves, controls the fluid pressure generated by the pump and applies it to each wheel cylinder in the following 3 modes: pressure reduction, pressure holding, and pressure increase modes. As a result, understeer tendencies are controlled.


ii.

Understeer restraining control is performed by applying the brakes on the inner circle of the turn. Also, depending on whether the brakes are applied and the vehicle condition, there are circumstances in which the brake of a specific wheel may not be applied even if it was targeted for braking.


iii.

The operation of the solenoid valves under the ACA is the same as the VSC operation.



f.

Steering Cooperative Control

i.

The operation of the solenoid valves under the steering cooperative control is the same as the TRC or VSC operation.



g.

Hill-start Assist Control

i.

Hill-start assist control is performed by closing the master cylinder cut solenoid valves after the driver operates the brake pedal and leaving a certain amount of hydraulic pressure created by the pump in the wheel cylinder. The diagram below shows the hydraulic circuit in pressure holding mode.

Hill-start Assist Control Operation
X147148C01
3.271,5.229 3.417,5.385 3.417,5.385 3.417,6.094 true 3.99,5.25 3.823,5.385 3.823,5.385 3.823,6.073 true 3,7.25 3.167,7.25 3.167,7.25 3.365,6.625 true 4.167,7.25 4,7.25 4,7.25 3.875,6.635 true 0.5,2.417 0.667,2.417 0.667,2.417 1.323,2.75 true 2.167,2.5 2.333,2.5 2.333,2.5 2.646,2.75 true 4.604,2.75 4.917,2.5 4.917,2.5 5.083,2.5 true 5.927,2.75 6.5,2.417 6.5,2.417 6.667,2.417 true 0.5,3.917 0.667,3.917 0.667,3.917 1.594,4.219 true 2.083,4.917 2.25,4.917 2.25,4.917 2.5,4.219 true 5.167,4.917 5,4.917 5,4.917 4.729,4.219 true 5.667,4.219 6.5,3.917 6.5,3.917 6.667,3.917 true 0.5,5.083 0.667,5.083 0.667,5.083 1.573,5.406 true 1.917,6.417 2.083,6.417 2.083,6.417 2.5,5.417 true 5.25,6.417 5.083,6.417 5.083,6.417 4.74,5.406 true 5.667,5.417 6.5,5.083 6.5,5.083 6.667,5.083 true 3.531,0.552 3.844,0.708 0.313,0.156 10 false *1 0.677,1.458 0.99,1.615 0.313,0.156 10 false *2 5.521,1.781 5.833,1.938 0.313,0.156 10 false *3 3.365,6.104 3.677,6.26 0.313,0.156 10 false *4 2.813,7.156 3.125,7.313 0.313,0.156 10 false *5 1.385,7.271 1.698,7.427 0.313,0.156 10 false *6 2.51,7.281 2.823,7.438 0.313,0.156 10 false *7 4.604,7.26 4.917,7.417 0.313,0.156 10 false *8 5.646,7.281 5.958,7.438 0.313,0.156 10 false *9 3.76,6.104 4.073,6.26 0.313,0.156 10 false *4 4.229,7.156 4.542,7.313 0.313,0.156 10 false *5 1.917,2.406 2.375,2.604 0.458,0.198 10 false (B) 0.26,2.323 0.719,2.521 0.458,0.198 10 false (A) 5.146,2.406 5.604,2.604 0.458,0.198 10 false (C) 6.729,2.323 7.042,2.563 0.313,0.24 10 false (D) 1.26,3.344 1.719,3.542 0.458,0.198 10 false (1) 2.573,3.333 3.031,3.531 0.458,0.198 10 false (2) 4.51,3.333 4.969,3.531 0.458,0.198 10 false (3) 5.823,3.354 6.281,3.552 0.458,0.198 10 false (4) 1.531,4.802 1.99,5 0.458,0.198 10 false (5) 2.448,4.813 2.906,5.01 0.458,0.198 10 false (6) 4.635,4.823 5.094,5.021 0.458,0.198 10 false (7) 5.563,4.823 6.021,5.021 0.458,0.198 10 false (8) 1.542,5.99 2,6.188 0.458,0.198 10 false (9) 2.396,5.99 2.854,6.188 0.458,0.198 10 false (10) 4.604,5.99 5.063,6.188 0.458,0.198 10 false (11) 5.531,5.99 5.99,6.188 0.458,0.198 10 false (12) 0.271,3.823 0.729,4.021 0.458,0.198 10 false (E) 1.833,4.823 2.292,5.021 0.458,0.198 10 false (F) 5.24,4.823 5.698,5.021 0.458,0.198 10 false (G) 6.729,3.823 7.042,4.063 0.313,0.24 10 false (H) 0.333,4.979 0.792,5.177 0.458,0.198 10 false (I) 1.708,6.323 2.167,6.521 0.458,0.198 10 false (J) 5.323,6.313 5.781,6.51 0.458,0.198 10 false (K) 6.74,4.99 7.052,5.229 0.313,0.24 10 false (L)
*1 Electric Brake Booster (Brake Booster with Master Cylinder Assembly) *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Reservoir *6 Front Brake Caliper
*7 Rear Brake Caliper *8 Rear Brake Caliper
*9 Front Brake Caliper - -


Hill-start Assist Control Operation
Item Port Hill-start Assist Control Not Activated Hill-start Assist Control Activated
Holding Mode Reduction Mode

*: Hydraulic pressure is controlled by continuously cycling the solenoid valves between open and closed, according to the operating conditions.

Master Cylinder Cut Solenoid Valve (1), (4) (A), (D) Off (Open) On* On*
Reservoir Cut Solenoid Valve (2), (3) (B), (C) Off (Closed) Off (Closed) Off (Closed)
Front Brakes Pressure Holding Solenoid Valve (5), (8) (E), (H) Off (Open) Off (Open) Off (Open)
Pressure Reduction Solenoid Valve (9), (12) (I), (L) Off (Closed) Off (Closed) Off (Closed)
Brake Wheel Cylinder Pressure - - Holds Reduces
Rear Brakes Pressure Holding Solenoid Valve (6), (7) (F), (G) Off (Open) Off (Open) Off (Open)
Pressure Reduction Solenoid Valve (10), (11) (J), (K) Off (Closed) Off (Closed) Off (Closed)
Brake Wheel Cylinder Pressure - - Holds Reduces
Pump Off Off Off



h.

Brake Hold

i.

The operation of the solenoid valves under the brake hold is the same as the operation of the hill-start assist control.