Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM (for HV Model TMMF Made) › from 2020.07
NM36W0E _54 Brake _088478 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0434644 BRAKE CONTROL SYSTEM(for HV Model TMMF Made) DE DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM(for HV Model TMMF Made)  DETAILS  BRAKE CONTROL POWER SUPPLY UNIT  


CONSTRUCTION


a.

The brake control power supply is used as an auxiliary power source, in order to supply power to the brake system in a stable manner.


b.

The brake control power supply assembly contains capacitor cells, which store an electrical charge provided by the (12 V) vehicle power supply. When the voltage of the (12 V) vehicle power supply drops, the electrical charge stored in the capacitor cells is used as an auxiliary power supply for the brake system.

Brake Control Power Supply Assembly
X147102C01
4.396,2.75 4.813,3.167 4.813,3.167 4.979,3.167 true 5.052,3.063 5.365,3.219 0.313,0.156 10 false *1
*1 Connector - -


HINT:

Immediately after the ignition switch is turned off, this brake power supply assembly is in the discharging state, and some voltage remains in the capacitors. Therefore, make sure to check for residual voltage and discharge it if necessary, before removing the brake control power supply assembly from the vehicle or opening and inspecting the inside of the brake control power supply assembly case. For details, refer to the Repair Manual.