CONSTRUCTION
The parking brake mechanism portion, which consists of a bolt, nut, washers and bearing, transmits the rotational torque from the parking brake actuator assembly to the piston.
| *1 | Rear Disc Brake Cylinder | *2 | Parking Brake Actuator Assembly |
| *a | Rear Disc Brake Piston | *b | Nut |
| *c | Bolt | *d | Washer |
| *e | Bearing | - | - |
When replacing the brake pad and disc rotor, it is necessary to use the GTS to turn the pad replacement mode on. For details, refer to the Repair Manual.