CONSTRUCTION
A hollow type front stabilizer bar has been adopted. Furthermore, by increasing the diameter and reducing the wall thickness of the front stabilizer bar cross section, high roll stiffness has been achieved while also reducing weight.
The front stabilizer link assembly is connected via ball joints to the shock absorber assembly. This enhances responsiveness during initial roll, enhancing controllability, vehicle stability and ride comfort.
The front stabilizer bar and bush are bonded together, reducing friction in the suspension and ensuring a supple ride.
| *1 | Ball Joint | *2 | Front Stabilizer Link Assembly |
| *3 | Front Stabilizer Bush | *4 | Front Stabilizer Bar |
| *a | The illustrations shown are examples only. | - | - |