OUTLINE
A dry type single plate clutch system which is operated by hydraulic pressure is used.
The clutch system for EC6E manual transaxle uses the Concentric Slave Cylinder (CSC) in place of the clutch release cylinder.
A clutch master cylinder assembly with clutch pedal stopper is used.
The clutch start system is used to help enhance safety.
SPECIFICATION
| Item | Specification | ||
|---|---|---|---|
|
*: Outer Diameter x Inner Diameter |
|||
| Clutch | Type | Single Dry Plate Diaphragm | |
| Operation | Hydraulic | ||
| Clutch Cover | Type | Conventional | |
| Installed Load | N | 5060 | |
| Clutch Disc | Facing Size* | mm x mm (in. x in.) | 212 x 140 (8.35 x 5.51) |
| Clutch Master Cylinder | Type | Plunger | |
| Release Cylinder | Type | Concentric Slave Cylinder (CSC) | |
| Clutch Pedal | Type | Turnover | |
| Stroke (200 N Pedal Force) | mm (in.) | 146 (5.75) | |
| Pedal Ratio | 5.1 | ||
| Item | Specification | ||
|---|---|---|---|
|
*: Outer Diameter x Inner Diameter |
|||
| Clutch | Type | Single Dry Plate Diaphragm | |
| Operation | Hydraulic | ||
| Clutch Cover | Type | Conventional | |
| Installed Load | N | 3100 | |
| Clutch Disc | Facing Size* | mm x mm (in. x in.) | 200 x 140 (7.87 x 5.51) |
| Clutch Master Cylinder | Type | Plunger | |
| Release Cylinder | Type | Clutch Release Cylinder (CRC) | |
| Clutch Pedal | Type | Conventional | |
| Stroke (200 N Pedal Force) | mm (in.) | 146 (5.75) | |
| Pedal Ratio | 5.1 | ||
MAIN FEATURES
Clutch Master Cylinder Assembly with Stopper
The clutch pedal stopper mechanism built into the clutch master cylinder assembly reduces stroke variation when assembling parts, realizing reduced free play and improved clutch feeling.