FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Vehicle Approaching Speaker Controller | Controls starting and stopping of operation, sound pitch and volume level based on signals received from the hybrid vehicle control ECU and skid control ECU assembly. |
| Vehicle Approaching Speaker Assembly | Emits warning sounds based on the operation signal received from the vehicle approaching speaker controller. |
| Hybrid Vehicle Control ECU | ·
Outputs a shift position signal to the vehicle approaching speaker controller. ·
Outputs an engine running signal to the vehicle approaching speaker controller. |
| Combination Meter Assembly
·
Multi-information Display |
Displays a warning message when there is a malfunction in the acoustic vehicle alerting system. |
| Brake Actuator Assembly
·
Skid Control ECU |
Outputs a vehicle speed signal and stop light switch signal to the vehicle approaching speaker controller. |
OPERATING CONDITION
| Condition | Outline |
|---|---|
| System Active | The acoustic vehicle alerting system operates (emits a warning sound) when either of the following conditions is met:
·
The vehicle speed is 0 km/h (0 mph), the engine is stopped, the stop light is turned off and the shift position is other than P.* ·
The vehicle speed is 25 km/h (15 mph) or less, the engine is stopped and the shift position is other than P. |
| System Stop | The acoustic vehicle alerting system stops operating when any of the following conditions is met:
·
The engine starts. ·
The vehicle speed is more than 25 km/h (15 mph). ·
With a vehicle speed of 0 km/h (0 mph), the stop light on signal is received continuously for more than approximately 1 second. ·
The shift position is P. ·
With a vehicle speed of 0 km/h (0 mph), the stop light off signal is received continuously for more than approximately 2 seconds (such as when the vehicle is stopped, and in neutral with the parking brake applied). |
*: When the system is stopped due to a vehicle speed of 0 km/h (0 mph) and the stop light switch assembly off signal is received continuously for more than approximately 2 seconds, the system operates again when any of the following conditions is met:
- A vehicle speed signal of 1 km/h (1 mph) or more is received.
- The brake pedal is operated.
SYSTEM CONTROL
| Control | Outline |
|---|---|
| Vehicle Speed Linked Control | ·
Emits the warning sound by controlling the pitch of the sound in accordance with the vehicle speed. ·
The warning sound becomes higher as the vehicle accelerates and it becomes lower as the vehicle decelerates. |
| Fade-in/Fade Out Control | When the system starts operating, the warning sound volume gradually increases, and when system operation is stopped, the sound volume gradually decreases. |
| Control during Reverse Operation | When the vehicle is being driven in reverse, the warning sound volume is controlled so that the sound is easy to hear even to the rear of the vehicle. |
FUNCTION
Warning Indication
The combination meter assembly uses the multi-information display to notify the driver of acoustic vehicle alerting system malfunctions.
When the system is not available, the following warning occurs to warn the driver.
| Multi-information Display | Detail | Buzzer | DTC |
|---|---|---|---|
|
*: For models with headup display, master warning light icon displays on the headup display. |
|||
| Proximity Notification System Malfunction Visit Your Dealer* | This message appears when the vehicle approaching speaker controller detects a system malfunction | Illuminates | Repair is required DTCs are stored |
DIAGNOSIS
The vehicle approaching speaker controller will also store Diagnostic Trouble Codes (DTCs). The DTCs can be read by using the GTS. For details, refer to the Repair Manual.