CONSTRUCTION
Front Washer Nozzle
Diffuser type washer nozzle sub-assemblies are located on the cowl top ventilator louver sub-assembly to ensure good appearance.
With the adoption of the diffuser type washer nozzle sub-assemblies, only a small amount of washer fluid is needed to spray over a large area, providing excellent wiping performance.
| *1 | Washer Nozzle Sub-assembly | - | - |
| *a | Fluid Volume | *b | Main Flow Center |
| *c | The illustrations shown are examples only. | - | - |
Diffuser type washer nozzle sub-assemblies cannot be adjusted because of their structure. Do not attempt to adjust the nozzles as it could damage them. If adjustment is necessary, adjust the spray pattern by replacing the nozzles with those selected from the 3 part numbers available. For details, refer to the Repair Manual.
Rear Washer Nozzle
A spray type rear washer nozzle is located on the back door panel.
| *a | View from A | - | - |