Home › Engine / Hybrid System › G16E-GTS (FUEL) › FUEL SYSTEM › from 2020.09
NM36W0E _51 Engine / Hybrid System _095168 G16E-GTS FUEL _0447254 FUEL SYSTEM GE GENERAL F

G16E-GTS FUEL  FUEL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The G16E-GTS engine uses a Direct injection 4-stroke gasoline engine Superior version (D-4S) system, which has both direct and port type fuel injection. Fuel sent from the fuel pump (for low pressure) in the fuel tank sub-assembly is delivered to the low-pressure and high-pressure fuel systems. The fuel delivered to the low-pressure fuel system is injected from the port fuel injector assembly to the intake port. The fuel delivered to the high-pressure fuel system is pressurized by the fuel pump assembly (for high pressure) and injected from the direct fuel injector assembly to the combustion chamber. The system achieves improved engine performance, fuel economy and clean emissions.


b.

The direct injection system mainly consists of the fuel pump assembly (for high pressure), fuel delivery pipe sub-assembly (for direct injection) and direct fuel injector assembly. In this system, the ECM controls the fuel pump assembly (for high pressure) and direct fuel injector assembly based on signals from various sensors, thus optimally controlling fuel pressure, injection volume and injection timing.


c.

The port injection system mainly consists of the fuel pump (for low pressure), fuel delivery pipe (for port injection) and port fuel injector assembly. In this system, the ECM controls the port fuel injector assembly based on signals from various sensors, thus optimally controlling injection volume and timing.


d.

A system is used that prevents fuel leaks during collisions (airbag deployment) by turning the fuel pump (for low pressure) off, ensuring safety.


e.

The canister is integrated with the fuel suction tube with pump and gauge assembly and installed inside the fuel tank sub-assembly, achieving size and weight reduction.


f.

A quick connector is used at each connection of the fuel pipes in consideration of serviceability and reducing the number of parts.