Home › Engine / Hybrid System › G16E-GTS (FUEL) › FUEL SYSTEM › from 2020.09
NM36W0E _51 Engine / Hybrid System _095168 G16E-GTS FUEL _0447254 FUEL SYSTEM DE DETAILS F

G16E-GTS FUEL  FUEL SYSTEM  DETAILS  FUEL DELIVERY PIPE (FOR DIRECT INJECTION)  


CONSTRUCTION


a.

A pressed steel fuel delivery pipe sub-assembly (for direct injection) is used.


b.

A fuel pressure sensor (for high pressure) is installed on the fuel delivery pipe sub-assembly (for direct injection).


c.

A nozzle holder clamp is provided for each area where a direct fuel injector assembly is installed. This clamp applies a constant spring force to the direct fuel injector assembly to prevent it from moving when the combustion pressure is applied to the injector while the engine is being started, during which the fuel pressure is low. As a result, the clamp increases the sealing performance of the injector, while reducing vibration and noise.


d.

Metal-to-metal surface seal connections are used for the joint areas of the fuel pressure sensor and high-pressure fuel pipes.

W146053C01
2.156,1.813 2.406,1.396 2.406,1.396 2.573,1.396 true 1.104,1.865 1.271,1.865 1.271,1.865 1.49,1.49 true 2.75,3.417 2.917,3.417 2.917,3.417 3.167,3 true 4.031,3.667 4.281,3.25 4.281,3.25 4.448,3.25 true 1.333,3 1.5,3 1.5,3 1.75,2.583 true 0.917,1.771 1.229,1.927 0.313,0.156 10 false *1 1.146,2.917 1.458,3.073 0.313,0.156 10 false *2 2.667,1.292 2.979,1.448 0.313,0.156 10 false *3 2.542,3.344 2.854,3.5 0.313,0.156 10 false *4 4.531,3.156 4.844,3.313 0.313,0.156 10 false *5
*1 High-pressure Fuel Pipe *2 Fuel Delivery Pipe Sub-assembly (for Direct Injection)
*3 Fuel Pressure Sensor (for High Pressure) *4 Nozzle Holder Clamp
*5 Direct Fuel Injector Assembly - -