Home › Engine / Hybrid System › G16E-GTS (FUEL) › FUEL SYSTEM › from 2020.09
NM36W0E _51 Engine / Hybrid System _095168 G16E-GTS FUEL _0447254 FUEL SYSTEM DE DETAILS F

G16E-GTS FUEL  FUEL SYSTEM  DETAILS  FUEL INJECTOR (FOR DIRECT INJECTION)  


CONSTRUCTION


a.

High-pressure, 6-hole type direct fuel injector assemblies are used in conjunction with the adoption of the Direct injection 4-stroke gasoline engine Superior version (D-4S) system.


b.

The use of this direct fuel injector assembly causes the fuel to become highly atomized. At the same time, the fuel is mixed with a large amount of air and injected into the combustion chamber. As a result, fuel injection dissipation performance is improved to achieve a homogeneous air-fuel mixture, high performance and high engine output.


c.

A fuel injector seal is used for the cylinder internal pressure sealant and an insulator is used at the cylinder head sub-assembly contact area to reduce vibration and noise and improve sealing performance.


d.

An O-ring and No. 1 fuel injector back-up ring* are used in the direct fuel injector assembly. As a result, the transmission of operation noise from the direct fuel injector assembly is reduced to improve quietness and ensure fastener airtightness.

NOTICE:

*: The No. 1 fuel injector back-up ring is installed to securely support the rubber O-ring, which is subjected to high pressures. Take care to install the No. 1 fuel injector back-up ring in the correct direction at the correct installation position.


W146055C01
2.938,0.531 3.167,0.25 3.167,0.25 3.333,0.25 true 2.604,0.646 2.25,0.417 2.25,0.417 2.083,0.417 true 2.469,2.219 2.167,2.667 2.167,2.667 2,2.667 true 2.656,3.198 2.49,3.448 2.49,3.448 2.323,3.448 true 3.385,0.125 3.583,0.313 0.198,0.188 10 false *a 1.875,0.323 2.083,0.51 0.208,0.188 10 false *b 1.781,2.583 1.969,2.781 0.188,0.198 10 false *c 2.115,3.365 2.302,3.552 0.188,0.188 10 false *d 2.698,3.479 2.958,3.667 0.26,0.188 10 false *e 5.281,2.542 5.594,2.698 0.313,0.156 10 false *f
*a O-ring *b No. 1 Fuel Injector Back-up Ring
*c Injector Vibration Insulator *d Fuel Injector Seal
*e Direct Fuel Injector Assembly Cross Section *f Injection Hole