Home › Engine / Hybrid System › G16E-GTS (FUEL) › FUEL SYSTEM › from 2020.09
NM36W0E _51 Engine / Hybrid System _095168 G16E-GTS FUEL _0447254 FUEL SYSTEM CO CONTROL F

G16E-GTS FUEL  FUEL SYSTEM  CONTROL  D-4S SYSTEM  


FUNCTION


a.

The Direct injection 4-stroke gasoline engine Superior version (D-4S) system has 2 fuel injection methods. One is the in-cylinder direct injection method that directly injects pressurized fuel into the combustion chamber. The other is the intake port injection method. The ECM determines which fuel injection method to use in accordance with the engine conditions.


b.

When the engine is in the low to middle load range, the direct injection method or port injection method is used, or both methods are used together, to improve fuel economy and achieve low emissions by achieving a homogeneous air-fuel mixture and stable combustion. Also, only the direct injection method is used when the engine is in the high load range. As a result, engine output performance is improved while high compression is achieved by reducing knocking and improving the effect of charging due to cooling the intake.


c.

Directly after a cold engine start, fuel is injected from the direct fuel injector assembly during the compression stroke while the air-fuel mixture in the combustion chamber homogenizes due to the injection of fuel from the port fuel injector assembly. As a result, the air-fuel mixture is stratified around the spark plug to enable a large retarded angle during ignition timing, increase the exhaust gas temperature and quickly warm the catalyst.


d.

A high-pressure injector with multiple injection holes (6-hole type) in which the injection angle is optimized and fuel is highly atomized is used for the direct fuel injector assembly. Highly pressurized and atomized fuel promotes the mixing of fuel and air by following a vertical swirl flow (tumble flow) to achieve high performance and high engine output.

W146046C01
1.177,2.25 1.344,2.25 1.344,2.25 2.198,1.625 true 1.125,3.323 1.292,3.323 1.292,3.323 2.083,2.583 true 0.979,2.167 1.292,2.323 0.313,0.156 10 false *1 0.906,3.25 1.219,3.406 0.313,0.156 10 false *2
*1 Port Fuel Injector Assembly *2 Direct Fuel Injector Assembly


Fuel Injector System Activation Ranges (Image)
W138633E03
2.896,1.615 3.417,0.333 3.417,0.333 3.583,0.333 true 5.406,1.031 5.813,1.031 true 5.875,0.958 7.146,1.24 1.271,0.281 10 false Direct Injection 2.583,1.927 3.604,2.156 1.021,0.229 10 false Port Injection 3.677,0.229 5.75,0.5 2.073,0.271 10 false Direct Injection + Port Injection 0.76,1.26 1.833,1.479 1.073,0.219 10 false Engine Load 3.469,2.365 4.406,2.583 0.938,0.219 10 false Engine Speed