Home › Engine / Hybrid System › G16E-GTS (EMISSION CONTROL) › EVAPORATIVE EMISSION CONTROL SYSTEM › from 2020.09
NM36W0E _51 Engine / Hybrid System _095169 G16E-GTS EMISSION CONTROL _0447257 EVAPORATIVE EMISSION CONTROL SYSTEM CO CONTROL F

G16E-GTS EMISSION CONTROL  EVAPORATIVE EMISSION CONTROL SYSTEM  CONTROL  EVAPORATIVE EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the evaporative emission control system are as follows:

Component Function
Fuel Suction Tube with Pump and Gauge Assembly Canister Contains activated charcoal to absorb the fuel vapor that is created in the fuel tank sub-assembly.
Purge VSV (No. 1 Vacuum Switching Valve Assembly) Opens in accordance with the signals from the ECM when the system is purging in order to send the fuel vapor that was absorbed by the canister into the intake manifold.
No. 2 Turbo Pressure Sensor Detects the intake manifold pressure.
ECM Controls the purge VSV (No. 1 vacuum switching valve assembly) in accordance with the signals from various sensors in order to achieve a purge volume that suits the driving conditions.



SYSTEM CONTROL


a.

Based on the signals from various sensors, the ECM opens and closes the purge VSV (No. 1 vacuum switching valve assembly). As a result, it controls the purge flow of evaporative emissions (HC) in the canister in accordance with the engine operating conditions.