FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Crank Position Sensor | Detects the engine speed. |
| Air Intake Control Valve | Located on the front surface of the air cleaner assembly, and opens and closes to switch between air intake pathways. |
| Vacuum Switching Valve Assembly (for Air Intake Control Valve) | Switches the vacuum pressure applied to the actuator to open and close the air intake control valve. |
| ECM | Sends signals to the vacuum switching valve assembly (for air intake control valve) at an optimal timing according to signals from the sensor. |
FUNCTION
A dual intake system, which uses an air intake control valve on the air cleaner assembly to switch the air intake between 2 levels according to driving conditions, has been adopted.
At low engine speeds, only normal air intake via the No. 1 air cleaner inlet is performed, while at high engine speeds, in addition to the normal air intake the air intake control valve opens to change the volume of air sent to the engine, providing more optimal power and torque characteristics suited to the various driving conditions.