Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › from 2020.09
NM36W0E _59 Vehicle Exterior _088687 EXTERIOR PANELS / TRIM _0422149 BODY STRUCTURE GE GENERAL F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  GENERAL  GENERAL  


OUTLINE


a.

Lightweight and Highly Rigid Body

i.

High-strength steel, carbon material*1, aluminum material*1, ultra high-strength steel and hot-stamped steel*2 are used in order to achieve excellent body rigidity and a lightweight body.

HINT:

*1: 3 door models

*2: 5 door models




b.

Rust-resistant Body

i.

Rust-resistant performance is enhanced by the extensive use of anti-corrosion sheet steel, as well as by an anti-corrosion treatment that includes the application of anti-rust wax, sealer and anti-chipping paint to the easily corroded parts such as the hood and rocker.



c.

Safety Features

i.

The impact absorbing structure helps minimize cabin deformation by effectively helping to absorb the impact energy in the event of a front, side or rear collision. Helps provide high performance occupant protection.



d.

Aerodynamics

i.

Various types of airflow routing parts that control airflow are provided under the floor, and an undercover is provided to make the under-floor area flat in order to enhance excellent aerodynamic performance.



e.

Low Vibration and Low Noise Body

i.

Effective application of vibration damping and noise suppressant materials reduces engine, wind and road noise.




MAIN FEATURES


a.

Exterior Design Theme

i.

B-Dash

·

The exterior design was conceptualized as a fusion of multiple key aspects: "Bold", "Brisk", "Boost", "Beauty", and dashing like a "Bullet", achieving an expression of condensed power that seems ready to spring into action at any moment.

·

The condensed cabin, formed by shaving away any unnecessary bits, and its sculpted form directed toward the tires, expresses a style and design giving a premonition of active driving.

·

The 3-door vehicles adopt a design aimed at maximized downforce and enhanced aerodynamic performance as an homage to the enhanced competitive abilities that enable victory at races such as the WRC.




b.

Front Design (5 Door Models)

i.

The strength of the front mask is expressed through a sense of motion pushing out forward from the entirety of the compressed body toward the large grille that merges the upper and lower body.

Normal Body Models
Y259077

Wide Body Models
Y262525


ii.

The three-dimensional sculpting extending from the side rocker panel molding to the bumper corner and the grille emphasizes the low-center-of-gravity posture and the excellent stance, while also conferring agility via the T-shaped grille opening.

Normal Body Models
Y259078

Wide Body Models
Y262526



c.

Front Design (3 Door Models)

i.

In accordance with the GR brand's unified front face design, "Functional MATRIX", the design expresses the fusion of a construction focused on driving performance with a unified brand image.

·

A square, large-opening under grille matched to the radiator shape has been adopted.

·

To handle the enlarged brake ducts, intercooler, etc., a large front fog light bezel has been adopted.

·

To control the aerodynamics of the lower surfaces, a large under spoiler with an upraised center portion has been adopted.

·

Corner lip shapes have been adopted to generate downforce when cornering.



ii.

The lower spoiler portion (A in illustration) has been designed with a cross-section that provides a downforce effect, and is continuous with the corner portions (B and C in illustration) which provide canard functionality at the top and bottom, achieving a sporty impression emphasizing "WIDE & LOW".


iii.

By layering the large-opening under grille (D in illustration), which emphasizes functionality, with the brake ducts (E in illustration), the vehicle has been provided with characteristics in pursuit of a racing image.


iv.

The GR emblem is located on the bar design portion that pierces through next to the under grille, appealing to the brand image.

Y267286N01
5.479,4.667 5.313,4.667 5.313,4.667 4.979,3.917 true 0.896,4.385 1.063,4.385 1.063,4.385 1.563,3.885 true 2.292,4.635 2.458,4.635 2.458,4.635 2.958,4.135 true 4.115,4.656 3.948,4.656 3.948,4.656 3.615,3.99 true 0.833,2.417 1.083,2.417 1.083,2.417 1.531,2.938 true 2.125,4.542 2.281,4.74 0.156,0.198 10 false A 0.719,4.281 0.875,4.479 0.156,0.198 10 false C 0.646,2.313 0.802,2.51 0.156,0.198 10 false D 4.219,4.552 4.375,4.75 0.156,0.198 10 false D 5.552,4.573 5.708,4.771 0.156,0.198 10 false E



d.

Headlight

·

The model equipped with LED headlights expresses a vibrant look by using a light guide light that integrates the functions of LED trinocular reflectors and daytime running lights and turn signal lights into a sharp outer shape.

·

Halogen headlight-equipped vehicles are based around single-lens projectors that integrate low and high beams, with other lights positioned to keep a minimal vertical dimension.

Headlight Assembly (This illustration is an example only.)
Y259079C02
0.198,0.25 0.583,0.542 0.385,0.292 12 false *A: 3.667,0.25 4.031,0.51 0.365,0.26 12 false *B:
*A Models with LED Type Headlight *B Models with Halogen Type Headlight




e.

Side Design (5 Door Models)

i.

The forward leaning posture of the cabin (A in illustration) combined with the movement of the under body (B in illustration) that flows forward from the rear flare to the headlight, expresses a vibrant energy that seems ready to spring into action at any moment.

Normal Body Models
Y259080N02
3.25,1.917 4,0.667 4,0.667 4.167,0.667 true 3.333,4 3.167,4 3.167,4 2.167,2.333 true 4.25,0.583 4.406,0.781 0.156,0.198 10 false A 3.406,3.917 3.563,4.115 0.156,0.198 10 false B

Wide Body Models
Y262527N01
3.25,1.917 4,0.667 4,0.667 4.167,0.667 true 3.333,4 3.167,4 3.167,4 2.167,2.333 true 4.25,0.583 4.406,0.781 0.156,0.198 10 false A 3.406,3.917 3.563,4.115 0.156,0.198 10 false B


ii.

The rear flare (A in illustration) emphasizes active driving by expressing agility with a wedge-shaped movement that traces a curve.


iii.

The rocker panel molding (B in illustration), which is standard equipment, expresses a low-center-of-gravity posture.

Normal Body Models
Y259081N02
4.458,4.104 4.292,4.104 4.292,4.104 3.792,3.271 true 5.75,2.167 6.25,1.333 6.25,1.333 6.417,1.333 true 6.49,1.25 6.646,1.448 0.156,0.198 10 false A 4.531,4.021 4.688,4.219 0.156,0.198 10 false B

Wide Body Models
Y262528N01
4.458,4.104 4.292,4.104 4.292,4.104 3.792,3.271 true 5.75,2.167 6.25,1.333 6.25,1.333 6.417,1.333 true 6.49,1.25 6.646,1.448 0.156,0.198 10 false A 4.531,4.021 4.688,4.219 0.156,0.198 10 false B



f.

Side Design (3 Door Models)

i.

On 5-door vehicles, the lowering of the roof height together with the lowering from the rear edge of the roof increases the volume of wind reaching the rear spoiler, maximizing downforce and enhancing aerodynamics.

Y267287C01
4.5,1.271 4.083,0.521 4.083,0.521 3.917,0.521 true 5.917,1.667 5.5,0.917 5.5,0.917 5.333,0.917 true 5.146,0.813 5.458,0.969 0.313,0.156 10 false *1 3.719,0.406 4.031,0.563 0.313,0.156 10 false *a
*1 Rear Spoiler - -
*a 5 Door Roof Position - -



ii.

A side shape with styling reminiscent of that used on racecars has been adopted, with airflow from the front wheel housings along the body, achieving enhanced aerodynamic performance.

Y267288



g.

Rear Design (5 Door Models)

i.

The upper body (A in illustration) with a unique structure that combines the back window and rear combination lights in a single graphic, and the bumper that supports it, expresses the excellent stance with a shape that emphasizes the overhang of the tire. (B in illustration)

Normal Body Models
Y259082N02
1.917,1.083 1.417,0.25 1.417,0.25 1.25,0.25 true 5.583,2.917 6.083,2.083 6.083,2.083 6.25,2.083 true 1.542,2.917 1.042,2.083 1.042,2.083 0.875,2.083 true 1.094,0.167 1.25,0.365 0.156,0.198 10 false A 6.323,2 6.479,2.198 0.156,0.198 10 false B 0.719,2 0.875,2.198 0.156,0.198 10 false B

Wide Body Models
Y262529N01
1.938,1.083 1.438,0.25 1.438,0.25 1.271,0.25 true 5.583,2.917 6.083,2.083 6.083,2.083 6.25,2.083 true 1.542,2.917 1.042,2.083 1.042,2.083 0.875,2.083 true 1.115,0.167 1.271,0.365 0.156,0.198 10 false A 6.323,2 6.479,2.198 0.156,0.198 10 false B 0.719,2 0.875,2.198 0.156,0.198 10 false B

·

A slim back-up light (A in illustration) and a reflex reflector assembly (B in illustration) are placed on the large trapezoidal garnish at the bottom of the bumper.

·

The lower area is visually tightened up by blackout styling, and the movement toward the tire is further emphasized to enhance sportiness. (C in illustration)

Normal Body Models
Y259083N02
1.042,4.333 1.208,4.333 1.208,4.333 1.458,3.917 true 4.5,4.083 4.667,4.083 4.667,4.083 5.167,3.25 true 2.604,4.083 2.438,4.083 2.438,4.083 1.938,3.25 true 3.938,4 3.771,4 3.771,4 3.417,3.417 true 5.667,3.917 5.917,4.333 5.917,4.333 6.083,4.333 true 4.021,3.917 4.177,4.115 0.156,0.198 10 false A 2.677,4 2.833,4.198 0.156,0.198 10 false B 0.875,4.25 1.031,4.448 0.156,0.198 10 false C 4.344,4 4.5,4.198 0.156,0.198 10 false B 6.156,4.25 6.313,4.448 0.156,0.198 10 false C

·

The lower area is visually tightened up by blackout styling, and the movement toward the tire is further emphasized to enhance sportiness. (C in illustration)

Wide Body Models
Y262530N01
0.917,4.583 1.083,4.583 1.083,4.583 1.333,4.167 true 4.75,4.417 4.917,4.417 4.917,4.417 5.417,3.583 true 2.417,4.417 2.25,4.417 2.25,4.417 1.75,3.583 true 3.917,4.271 3.75,4.271 3.75,4.271 3.396,3.688 true 5.833,4.167 6.083,4.583 6.083,4.583 6.25,4.583 true 3.99,4.167 4.146,4.365 0.156,0.198 10 false A 2.49,4.313 2.646,4.51 0.156,0.198 10 false B 0.76,4.479 0.917,4.677 0.156,0.198 10 false C 4.583,4.313 4.74,4.51 0.156,0.198 10 false B 6.323,4.479 6.479,4.677 0.156,0.198 10 false C




h.

Rear Design (3 Door Models)

·

The rear edge of the roof (A in illustration) and the rear pillar surroundings (B in illustration) have been narrowed, enhancing downforce and aerodynamic performance.

Y267289N01
3.854,1.531 2.604,0.365 2.604,0.365 2.438,0.365 true 5.271,1.135 6.073,0.385 6.073,0.385 6.24,0.385 true 6.25,1.5 6.667,1.104 6.667,1.104 6.833,1.104 true 6.313,0.302 6.469,0.5 0.156,0.198 10 false A 6.906,1.01 7.063,1.208 0.156,0.198 10 false B 2.26,0.271 2.417,0.469 0.156,0.198 10 false B

·

By emphasizing the projection of the rear fender (A in illustration), a more "WIDE & LOW" silhouette has been realized.

Y267290N01
1.5,4.5 1.667,4.5 1.667,4.5 2.167,3.167 true 4.979,3.167 5.313,4.5 5.313,4.5 5.479,4.5 true 1.333,4.417 1.49,4.615 0.156,0.198 10 false A 5.552,4.417 5.708,4.615 0.156,0.198 10 false A



i.

Rear Combination Light

·

The rear combination lights of the model equipped with LED headlights have a side lens and tail light graphic that has the same features as the headlights.

·

The rear combination lights for cars without LED headlights have a concentric lens graphic so that the light performance can be optimized while maintaining the same characteristics as headlights of the same grade.

Rear Combination Light (This illustration is an example only.)
Y259084C02
0.198,0.25 0.583,0.542 0.385,0.292 12 false *A: 3.667,0.25 4.031,0.51 0.365,0.26 12 false *B:
*A Models with LED Type Rear Turn Signal Light *B Except Models with LED Type Rear Turn Signal Light