Home › Drivetrain › EA67F (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSAXLE SYSTEM › from 2020.09
NM36W0E _52 Drivetrain _095406 EA67F MANUAL TRANSMISSION / TRANSAXLE _0448499 MANUAL TRANSAXLE SYSTEM GE GENERAL F

EA67F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The EA67F 6-speed manual transaxle is used.


b.

An Intelligent Manual Transmission (iMT) system is used, this system for manual transmission vehicles adjusts the engine speed during a shift change to match the transmission speed, achieving a smooth shift change.


c.

A Gear Shift Indicator system is used. (Models with Gear Shift Indicator System)


d.

For the differential, a TORSEN LSD has been adopted depending on the vehicle specification.



SPECIFICATION


Item Specification
Mesh Type Forward Constant Mesh
Reverse Constant Mesh
Gear Ratio 1st 3.538
2nd 2.238
3rd 1.535
4th 1.162
5th 1.081
6th 0.902
Reverse 3.831
Differential Gear Ratio 1st to 4th 3.941
5th to 6th, Reverse 3.350
Synchromesh Mechanism Type 1st,2nd,3rd Triple-cone
4th Double-cone
5th,6th, Reverse Single-cone
Oil Type "TOYOTA Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"


PRECAUTION


a.

Limitations of the iMT

i.

In some situations, such as when there is a delay between clutch operation and shift operation, or when the vehicle is driven with the shift lever in neutral (N) and then a shift operation is performed, the system may not detect that the driver performed a shift operation, but this is not a malfunction.


ii.

After the iMT system has adjusted the engine speed, after a specified period of time has elapsed, system control will end, even in this situation, if the clutch is re-engaged and a new shift operation is detected, the system will operate again.


iii.

If the clutch pedal is not fully released, or not firmly depressed, the system may not operate.


iv.

This is not a system for preventing improper shift operations.


v.

This is not a system for preventing engine over-revving (excessively high engine speed).


vi.

If the engine speed is not synchronized, shift shock may occur, perform clutch operations properly and do not over-rely on the system.


vii.

If the iMT display color changes to amber (normal color is green), there may be a malfunction in the iMT system, so the function ceases operation, in this case, contact your Toyota dealer.