Home › Suspension › REAR SUSPENSION › REAR SUSPENSION SYSTEM › from 2020.09
NM36W0E _53 Suspension _088341 REAR SUSPENSION _0421182 REAR SUSPENSION SYSTEM GE GENERAL F

REAR SUSPENSION  REAR SUSPENSION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Torsion-beam type suspension (Except Models for GR Yaris)

i.

By optimizing the suspension characteristics, excellent steering stability as well as a quality driving feel have both been achieved to a high degree.


ii.

A toe-correct bush* is used for the trailing arm, thus providing excellent driving stability and ride comfort.


iii.

By optimizing the absorber damping force at extremely low speed ranges, excellent steering stability as well as superior riding quality have been achieved to a high degree.


iv.

On except models for Australia, a pipe beam has been adopted, achieving optimized cross-sectional shape and contributing to both high roll rigidity and reduced weight.


v.

On models for Australia, a hollow type rear stabilizer bar has been adopted, with expanded sections at the ends to achieve both high roll rigidity and reduced weight.

HINT:

*: The toe-correct bush functions to provide a steering correction effect.




b.

Double-wishbone type suspension (Models for GR Yaris)

i.

To provide the rigidity and geometrical characteristics required for sporty driving, a double wishbone suspension composed of trailing arms has been adopted.


ii.

By optimizing the absorber damping force at extremely low speed ranges, excellent steering stability as well as superior riding quality have been achieved to a high degree.


iii.

A spherical bearing has been adopted for the No. 1 rear suspension arm assembly and No. 2 rear suspension arm assembly installation on the rear axle carrier side for enhanced responsiveness and slide controllability.


iv.

The absorber length has been modified to provide an expanded initial camber, achieving a ground camber that allows the tire performance to be more fully expressed during cornering.


v.

A hollow type rear stabilizer bar has been adopted, with a high-performance stabilizer layout to achieve both high roll rigidity and reduced weight additionally, the rear stabilizer bar and rear stabilizer bush are bonded to reduce abnormal noise as well as sliding friction.