CONSTRUCTION
Torsion-beam type suspension (Except Models for GR Yaris)
A hollow type rear stabilizer bar has been adopted, with expanded sections at the ends to achieve both high roll rigidity and reduced weight.
| *1 | Rear Stabilizer Bar | - | - |
| *a | The illustrations shown are examples only. | - | - |
Double-wishbone type suspension (Models for GR Yaris)
Both ends of the stabilizer bar are mounted to the rear axle carrier via the ball joint type stabilizer link, providing high rolling stiffness and initial responsiveness.
An adhesion type stabilizer bush has been adopted, reducing abnormal noise as well as sliding friction
| *1 | Stabilizer Link Assembly | *2 | Rear Stabilizer Bush |
| *3 | Rear Stabilizer Bar | - | - |