OUTLINE
Front Axle
Compact and highly rigid double-row angular ball bearings are used. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus enhancing excellent driving stability and braking stability.
Running torque has been reduced via low-friction type grease and seals, contributing to excellent fuel economy.
The sensor rotor is integrated in the bearing inner race.
A 12-point front axle shaft nut is used and staked in order to ensure that the front axle hub sub-assembly is properly tightened. Once removed, this nut cannot be reused.
For the GR Yaris hub bearing, electrically conductive grease has been adopted to strengthen the ground connection while the vehicle is in motion, this helps enhance handling stability through the reliable operation of electronic equipment as well as enhanced aerodynamic performance.
| *1 | Double-row Angular Ball Bearing | *2 | Sensor Rotor |
| *3 | Front Axle Shaft Nut (12-point) | *4 | Front Axle Hub Sub-assembly |
| *a | Electrically Conductive Grease | *b | The illustrations shown are examples only. |
Do not place magnetized objects close to the surface of the sensor rotor.
Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.
Rear Axle
Compact and highly rigid double-row angular ball bearings are used. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus enhancing excellent driving stability and braking stability.
Running torque has been reduced via low-friction type grease and seals, contributing to excellent fuel economy.
The sensor rotor is integrated in the bearing inner race.
A 12-point lock nut is used on the AWD models and staked in order to ensure that the axle hub is properly tightened. Once removed, this nut cannot be reused.
| *1 | Double-row Angular Ball Bearing | *2 | Sensor Rotor |
| *3 | Rear Axle Hub and Bearing Assembly | - | - |
| *a | The illustrations shown are examples only. | - | - |
| *1 | Double-row Angular Ball Bearing | *2 | Speed Sensor Rotor |
| *3 | Rear Axle Hub | *4 | Lock Nut (12-point) |
Do not place magnetized objects close to the surface of the sensor rotor.
Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.