CONSTRUCTION
The cam journal portion uses a 2-level construction, with a simplified structure for the cylinder head sub-assembly main body achieving lighter weight and enhanced serviceability.
The cylinder head sub-assembly, which is made of aluminum, contains pentroof-type combustion chambers. The spark plug is located in the center of the combustion chamber in order to improve the engine's anti-knock performance.
The shape of the intake ports, the combustion chambers and the injector fuel spray pattern have been optimized to enhance combustion efficiency.
By incorporating the exhaust port into the cylinder head sub-assembly, the exhaust port length has been optimized while also achieving exhaust gas cooling performance to improve fuel economy and exhaust performance.
The intake-side valve seats use the eccentric press-fit type, thus enabling the shape of the intake port to be optimized, increasing the tumble flow and intake air flow volume, and thereby improving engine power and fuel economy.
The valve lash adjuster assemblies are installed in the upper part of the cylinder head sub-assembly, creating a structure where the oil passage supplying oil to the valve lash adjuster assemblies are combined with the interior of the cylinder head sub-assembly.
| *1 | No. 1 Camshaft Bearing Cap | *2 | No. 2 Camshaft Bearing Cap |
| *3 | No. 3 Camshaft Bearing Cap (6 Pieces) | *4 | No. 4 Camshaft Bearing Cap (6 Pieces) |
| *5 | Cylinder Head Sub-assembly | *6 | Intake Valve |
| *7 | Exhaust Valve | *8 | Valve Lash Adjuster Assembly |
| *a | Intake Side | *b | Exhaust Side |
| *c | 41° | *d | Tumble Flow |
| *e | View from Bottom Side | *f | Spark Plug Hole |
| *g | A-A Cross Section | - | - |
A 2 part water jacket is used to optimize coolant volume and coolant flow speed, realizing high cooling performance.
| *a | Water Jacket (Upper Side) | *b | Water Jacket (Lower Side) |