CONSTRUCTION
A lightweight and high-strength aluminum die-cast oil pan sub-assembly is used. This assembly is integrated with the cylinder block, thus improving the rigidity of the join with the transaxle, and reducing vibration and noise transmitted to the interior of the vehicle cabin.
The oil supplied to the cylinder head sub-assembly is returned to the oil pan via 2 systems of oil passages, preventing churning of oil by the crankshaft and thereby reducing rotational resistance.
By integrating the oil pan sub-assembly with the high pressure oil passage, anti-churn baffle, etc., a simplified construction has been achieved.
By optimizing the shape of the anti-churn baffle, oil churning by the balance shaft sub-assembly has been reduced, suppressing uneven displacement of oil when driving.
| *1 | Oil Pan Sub-assembly | *2 | No. 2 Oil Pan Sub-assembly |
| *a | Oil Drain Passage | *b | Anti-churn Baffle |
| *c | High Pressure Oil Passage | - | - |