CONSTRUCTION
The pistons are made of aluminum alloy to allow them to be compact and lightweight.
A piston with a concave top surface is used to prevent air turbulence and to realize high speed combustion. This helps reduce the occurrence of engine knock.
Through optimization of the casting criteria, thinner wall thickness for the various parts of the piston and resultant weight reduction are achieved, while at the same time shot peening treatment has been applied for the top surface of the piston, achieving an even higher level of hardness.
Shot peening treatment is applied to the skirt portion of the piston, and a resin coating is applied for enhanced smoothness, thereby reducing frictional resistance with the cylinder bore. Furthermore, the extremely fine dimpling resulting from the shot peening treatment enhances oil retention and scuff resistance.
The groove for the No. 1 compression ring is insert cast with Ni-Resist cast iron, providing enhanced piston strength.
A Diamond Like Carbon (DLC) coating has been applied to the surface of the No. 1 compression ring and the oil ring side rail, in order to reduce friction losses and improve wear resistance.
To counteract increased oil consumption at high RPM, the circumference of the oil ring side rail adopts a symmetrical barrel shape. In addition to greatly reduced oil consumption, decreased friction is realized due to optimization of oil ring tension.
An oil ring expander which utilizes punched grooves to prevent deposits from accumulating is used. Oil flow between the expander and side rails is enhanced, realizing a structure that prevents deposits from accumulating.
| *1 | No. 1 Compression Ring | *2 | No. 2 Compression Ring |
| *3 | Oil Ring | - | - |
| *a | Combustion Bowl | *b | Shot Peening Treatment and Resin Coating |
| *c | DLC Coating | *d | Ni-Resist Cast Iron |
| *e | Shot Peening Treatment | - | - |