CONSTRUCTION
The shape of the crankshaft has been optimized to bring it to a state of total balance without adding a counterweight to the No. 2 cylinder pin, reducing the weight while achieving reliability and quietness.
The crankshaft has 4 main bearing journals and 4 balance weights.
| *a | No. 1 Main Bearing Journal | *b | No. 2 Main Bearing Journal |
| *c | No. 3 Main Bearing Journal | *d | No. 4 Main Bearing Journal |
| *e | Balance Weight | - | - |
A metal overlay is used on the inside surface of the crankshaft bearing to support the high-load and high-speed driving that occurs due to the use of a turbocharger.
A resin overlay is provided for the sliding surface of the crankshaft thrust washer, reducing friction and ensuring reliability.
| *1 | Upper Crankshaft Thrust Washer | *2 | Upper Main Bearing (Crankshaft Bearing) |
| *3 | Lower Main Bearing (Crankshaft Bearing) | - | - |
| *a | Metal Overlay | *b | Resin Overlay |