CONSTRUCTION
This engine has a Dual Variable Valve Timing-intelligent (Dual VVT-i) system which controls the intake and exhaust camshafts to provide optimal valve timing according to driving conditions.
The No. 1 valve rocker arm sub-assembly is used as a valve mechanism and by achieving size reduction while drastically reducing the amount of friction that occurs between the sliding parts and cams, low fuel consumption is achieved. Also, an oil pressure type valve lash adjuster assembly is used to make valve clearance adjustment unnecessary in consideration of serviceability.
A valve compression spring, whose upper portion is shaped like a beehive, is used to reduce inertial mass. As a result, the load on the valve compression spring and friction are reduced.
The structure of the oil retainer of the valve lash adjuster assembly has been enhanced to achieve a compact and lightweight design.
The exhaust valves ensure valve cooling performance and reliability by using sodium as a refrigerant. Holes are provided in the valve stems and sodium with high heat conductance and a low melting point is included to support high exhaust temperature. Also, the valve stems are made hollow to achieve weight reduction and reduce friction.
| *1 | Camshaft Timing Exhaust Gear Assembly | *2 | Camshaft Timing Gear Assembly |
| *3 | Exhaust Camshaft Sub-assembly | *4 | Intake Camshaft Sub-assembly |
| *5 | Valve Lash Adjuster Assembly | *6 | No. 1 Valve Rocker Arm Sub-assembly |
| *7 | Valve Stem Cap | *8 | Valve Spring Retainer Lock |
| *9 | Valve Spring Retainer | *10 | Valve Compression Spring |
| *11 | Valve Stem Oil Seal | *12 | Valve Spring Seat |
| *13 | Valve Guide Bush | *14 | Valve |