CONSTRUCTION
A 4-blade vane type VVT-i controller (camshaft timing gear assembly and camshaft timing exhaust gear assembly) is used on the intake and exhaust side.
When the engine is stopped, a lock pin locks the intake camshaft sub-assembly at the most retarded position and the exhaust camshaft sub-assembly at the most advanced position, to ensure that the engine starts properly.
A center spool structure that integrates the camshaft timing valve assembly with the camshaft timing gear assembly and camshaft timing exhaust gear assembly is used. With the shorter oil control circuit, the response of the engine and operation when cold is enhanced.
| *1 | Camshaft Timing Valve Assembly | *2 | Housing |
| *3 | Vane (Fixed on Camshaft) | *4 | Lock Pin |
| *5 | Cam Sprocket | *6 | Exhaust Camshaft Sub-assembly |
| *7 | Intake Camshaft Sub-assembly | - | - |
| *a | At a Stop | *b | In Operation |
|
Oil Pressure | - | - |
| *a | To Retard Side Vane Chamber | *b | To Advance Side Vane Chamber |
| *c | Engine Oil | *d | Drain |
| *a | To Advance Side Vane Chamber | *b | To Retard Side Vane Chamber |
| *c | Engine Oil | *d | Drain |
OPERATION
Advance
The cam timing oil control solenoid assembly operates according to the advance signal from the ECM. When the camshaft timing valve assembly reaches the position shown in the following illustration, the advance side vane chamber of the camshaft timing gear assembly and camshaft timing exhaust gear assembly is affected by oil pressure, and the vane inside the camshaft timing gear assembly and camshaft timing exhaust gear assembly rotates in the advanced direction. The camshaft fixed to the vane also rotates to the advanced side.
| *1 | Vane | *2 | ECM |
| *3 | Cam Timing Oil Control Solenoid Assembly | - | - |
| *a | Rotation Direction | *b | Retard Side Vane Chamber |
| *c | Advance Side Vane Chamber | *d | From Retard Side Vane Chamber |
| *e | To Advance Side Vane Chamber | *f | Drain |
| *1 | Vane | *2 | ECM |
| *3 | Cam Timing Oil Control Solenoid Assembly | - | - |
| *a | Rotation Direction | *b | Retard Side Vane Chamber |
| *c | Advance Side Vane Chamber | *d | To Advance Side Vane Chamber |
| *e | From Retard Side Vane Chamber | *f | Drain |
Retard
The cam timing oil control solenoid assembly operates according to the retard signal from the ECM. When the camshaft timing valve assembly reaches the position shown in the following illustration, the retard side vane chamber of the camshaft timing gear assembly and camshaft timing exhaust gear assembly is affected by oil pressure, and the vane inside the camshaft timing gear assembly and camshaft timing exhaust gear assembly rotates in the retarded direction. The camshaft fixed to the vane also rotates to the retarded side.
| *1 | Vane | *2 | ECM |
| *3 | Cam Timing Oil Control Solenoid Assembly | - | - |
| *a | Rotation Direction | *b | Retard Side Vane Chamber |
| *c | Advance Side Vane Chamber | *d | To Retard Side Vane Chamber |
| *e | From Advance Side Vane Chamber | *f | Drain |
| *1 | Vane | *2 | ECM |
| *3 | Cam Timing Oil Control Solenoid Assembly | - | - |
| *a | Rotation Direction | *b | Retard Side Vane Chamber |
| *c | Advance Side Vane Chamber | *d | From Advance Side Vane Chamber |
| *e | To Retard Side Vane Chamber | *f | Drain |
Hold
The ECM calculates the target advanced angle according to driving conditions and performs control. After setting the target timing, timings are maintained by the neutral camshaft timing valve assembly as long as driving conditions do not change. As a result, unnecessary engine oil discharge is suppressed while valve timings are aligned to the desired target position.