CONSTRUCTION
A bushing chain with an 9.525 mm (0.375 in.) pitch is used.
The No. 1 chain tensioner assembly uses a spring and oil pressure to maintain proper chain tension at all times. The No. 1 chain tensioner assembly suppresses noise generated by the chain sub-assembly.
Resin materials with high friction reducing efficiency and wear resistant are used on the chain tensioner slipper and No. 1 chain vibration damper shoe.
Aluminum is used for the chain tensioner slipper to enhance rigidity, reducing chain tension and friction.
| *1 | Timing Chain Guide | *2 | No. 1 Chain Vibration Damper |
| *3 | Chain Sub-assembly | *4 | No. 1 Chain Tensioner Assembly |
| *5 | Chain Tensioner Slipper | - | - |