Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM › from 2020.09
NM36W0E _53 Suspension _088340 FRONT SUSPENSION _0421159 FRONT SUSPENSION SYSTEM DE DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  DETAILS  SHOCK ABSORBER  


CONSTRUCTION


a.

Models for GR Yaris or Except Models with Rough Road Spec

i.

Low-pressure gas sealed-type shock absorbers with multi-leaf type linear control valves have been adopted, realizing high degrees of steering performance and stability as well as riding comfort.


ii.

By optimizing the frictional force of the shock absorber, rapid absorber response is possible from the time that motion begins, and by assuring damping force from extremely low speed ranges, excellent steering response as well as riding comfort and quality are achieved.

X147212C01
1.823,1.865 1.406,1.031 1.406,1.031 1.24,1.031 true 2.219,2.823 2.635,1.99 2.635,1.99 2.802,1.99 true 1.885,3.104 1.302,2.271 1.302,2.271 1.135,2.271 true 1.656,4.104 1.073,3.271 1.073,3.271 0.906,3.271 true 1.688,5.156 1.104,4.323 1.104,4.323 0.938,4.323 true 2.073,4.74 2.74,4.323 2.74,4.323 2.906,4.323 true 1.042,0.927 1.354,1.083 0.313,0.156 10 false *1 2.875,1.917 3.188,2.073 0.313,0.156 10 false *2 2.979,4.229 3.292,4.385 0.313,0.156 10 false *3 0.74,4.219 1.052,4.375 0.313,0.156 10 false *4 0.698,3.167 1.01,3.323 0.313,0.156 10 false *5 0.917,2.167 1.229,2.323 0.313,0.156 10 false *6 5.292,2.625 5.604,2.781 0.313,0.156 10 false *b 4.302,2.625 4.615,2.781 0.313,0.156 10 false *a 0.24,5.51 0.552,5.667 0.313,0.156 10 false *c
*1 Oil Seal *2 Low-pressure Gas
*3 Oil *4 Base Valve
*5 Multi-leaf Type Linear Control Valve *6 Rebound Stopper
*a Elongation Process Flow Channel *b Compression Process Flow Channel
*c The illustrations shown are examples only. - -


HINT:

To prevent hazardous conditions, make sure to empty the gas from the front shock absorber assembly before discarding the low-pressure air sealed in the front shock absorber assembly. For details, refer to the Repair Manual.




b.

Models with Rough Road Spec

i.

Low-pressure gas sealed-type shock absorbers with high-response piston valves have been adopted, realizing high degrees of steering performance and stability as well as riding comfort.


ii.

The highly responsive piston valves provide damping force from very low speed ranges, contributing to excellent steering response as well as suppression of high frequency oscillations for superior riding quality.

X147213C01
1.823,1.865 1.406,1.031 1.406,1.031 1.24,1.031 true 2.219,2.823 2.635,1.99 2.635,1.99 2.802,1.99 true 1.885,3.104 1.302,2.271 1.302,2.271 1.135,2.271 true 1.656,4.104 1.073,3.271 1.073,3.271 0.906,3.271 true 1.688,5.156 1.104,4.323 1.104,4.323 0.938,4.323 true 2.073,4.74 2.74,4.323 2.74,4.323 2.906,4.323 true 4.729,3.219 4.563,2.885 4.563,2.885 4.396,2.885 true 1.042,0.927 1.354,1.083 0.313,0.156 10 false *1 2.875,1.917 3.188,2.073 0.313,0.156 10 false *2 2.979,4.229 3.292,4.385 0.313,0.156 10 false *3 0.74,4.219 1.052,4.375 0.313,0.156 10 false *4 0.698,3.167 1.01,3.323 0.313,0.156 10 false *5 0.917,2.167 1.229,2.323 0.313,0.156 10 false *6 5.656,3.865 5.969,4.021 0.313,0.156 10 false *b 4.625,2.427 4.938,2.583 0.313,0.156 10 false *a 0.24,5.51 0.552,5.667 0.313,0.156 10 false *c 4.219,2.781 4.531,2.938 0.313,0.156 10 false *7
*1 Oil Seal *2 Low-pressure Gas
*3 Oil *4 Base Valve
*5 High-response Piston Valve *6 Rebound Stopper
*7 Piston Band - -
*a Elongation Process Flow Channel *b Compression Process Flow Channel
*c The illustrations shown are examples only. - -


HINT:

To prevent hazardous conditions, make sure to empty the gas from the front shock absorber assembly before discarding the low-pressure air sealed in the front shock absorber assembly. For details, refer to the Repair Manual.