CONSTRUCTION
While also adopting an L-shaped front lower No. 1 suspension arm sub-assembly with a pressed sheet steel construction using high-tensile strength steel sheet, achieving lighter weight while ensuring rigidity and strength.
By optimizing the characteristics of the lower arm bush, excellent steering stability as well as superior riding quality have been achieved.
The No. 1 bush uses a longitudinal axis type without outer sleeve, while the No. 2 bush uses a vertical axis type with outer sleeve bonding. In addition, the No. 2 bush adopts an inner sleeve made of aluminum with a bulge shape, with axial holes in the rubber portion to achieve both reduced weight and optimized spring characteristics.
The GR Yaris is characterized by the following features.
As a separate component from the lower ball joint, the front lower No. 1 suspension arm sub-assembly has been provided with a reinforcing plate on its mounting portion, achieving high cornering performance with the ability to handle large steering inputs.
For AWD vehicles, the rubber hardness of the No. 1 bush and the No. 2 bush was increased, and the axial holes were eliminated.
To handle the increased frequency of parts installation and removal in competitive driving, the detent protrusions of bolts and nuts were eliminated, reducing the roughening of seating surfaces incurred during installation and removal.
| *1 | No. 1 Bush | *2 | Front Lower No. 1 Suspension Arm Sub-assembly |
| *3 | No. 2 Bush | - | - |
| *a | No. 2 Bush Top View | *b | No. 2 Bush Cutaway View |
| *c | No. 1 Bush Cutaway View | *d | Axial Hole |
| *e | Bulge-shaped (Convex) Portion | *f | The illustrations shown are examples only. |
| *1 | No. 1 Bush | *2 | Front Lower No. 1 Suspension Arm Sub-assembly |
| *3 | No. 2 Bush | *4 | Front Lower Ball Joint Assembly |
| *5 | Arm Attachment Plate Inner RH NO. 1 | - | - |
| *a | No. 2 Bush Top View | *b | No. 2 Bush Cutaway View |
| *c | Bulge-shaped (Convex) Portion | *d | No. 1 Bush Cutaway View |
| *e | A - A Cross Section | *f | The illustrations shown are examples only. |