OUTLINE
1KR-FE Engine (for Gasoline Models)
This engine uses the Direct Ignition System (DIS), Dual Variable Valve Timing-intelligent (Dual VVT-i) system and Electronic Throttle Control System-intelligent (ETCS-i). These systems achieve improved engine performance, quietness, fuel economy and clean emission.
| Item | Specification | |
| No. of Cyls. and Arrangement | 3-cylinder, In-line | |
| Valve Mechanism | 12-valve DOHC, Chain Drive (with Dual VVT-i) | |
| Fuel System | Sequential Multiport Fuel Injection (SFI) | |
| Displacement | cm3 (cu. in.) | 998 (60.9) |
| Max. Output (EEC) | kW@rpm | 53@6000 |
| Max. Torque (EEC) | N*m@rpm | 93@4400 |
M15A-FKS Engine (for Gasoline Models)
The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which realizes optimal valve timing by using engine oil pressure to actuate the intake camshaft actuators and exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine (D-4) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. Thus, improved engine performance, quietness, fuel economy and cleaner emissions have been achieved.
|
*1: Models for Australia *2: Models for Europe |
||
| Item | Specification | |
| No. of Cyls. and Arrangement | 3-cylinder, In-line | |
| Valve Mechanism | 12-valve DOHC, Chain Drive (With VVT-iW and VVT-i) | |
| Fuel System | Sequential Multiport Fuel Injection (SFI) D-4 | |
| Displacement | cm3 (cu. in.) | 1490 (90.9) |
| Max. Output (EEC) | kW@rpm | 88@6600*1
92@6600*2 |
| Max. Torque (EEC) | N*m@rpm | 145@4800 to 5200*1
153@4800 to 5000*2 |
M15A-FXE Engine (for HV Models)
The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which realizes optimal valve timing by using electric motors to actuate the intake camshaft actuators and engine oil pressure to actuate the exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. Thus, improved engine performance, quietness, fuel economy and cleaner emissions have been achieved.
|
*1: Models for Australia *2: Models for Europe |
||
| Item | Specification | |
| No. of Cyls. and Arrangement | 3-cylinder, In-line | |
| Valve Mechanism | 12-valve DOHC, Chain Drive (With VVT-iE and VVT-i) | |
| Fuel System | Sequential Multiport Fuel Injection (SFI) | |
| Displacement | cm3 (cu. in.) | 1490 (90.9) |
| Max. Output (EEC) | kW@rpm | 67@5500*1
68@5500*2 |
| Max. Torque (EEC) | N*m@rpm | 120@3800 to 4800*1
120@3600 to 4800*2 |
G16E-GTS Engine (for GR YARIS)
A G16E-GTS (1.6 L) engine is used to achieve a higher dimension of balance between fuel efficiency, high performance, clean exhaust gas performance and quietness.
A Direct injection 4-stroke gasoline engine Superior version (D-4S) system (which uses both a direct cylinder injection method and port injection method) is used to perform efficient combustion. In addition, a turbocharger, Electronic Throttle Control System-intelligent (ETCS-i) and Dual Variable Valve Timing-intelligent (Dual VVT-i) system (a continuously variable valve timing mechanism for intake and exhaust) are used to achieve low fuel efficiency, low emissions, high performance and high output.
A Direct injection 4 stroke gasoline engine Superior version with Turbo (D-4ST) that comprehensively performs supercharging control for the turbocharger and Direct injection 4-stroke gasoline engine Superior version (D-4S) system. By optimizing the shape of the cylinder head port and piston top surface, it is possible to achieve high tumble flow in addition to high-level supercharged pressure control, improving fuel efficiency and low speed torque.
The shape of the high-efficient intake port, offset crankshaft and combustion chamber is optimized to improve combustion efficiency, and the valve mechanism system is improved to reduce friction loss in each part of the engine. As a result, a high level of engine fuel efficiency is achieved.
|
*1: Models for Australia *2: Models for Europe |
||
| Item | Specification | |
| No. of Cyls. and Arrangement | 3-cylinder, In-line | |
| Valve Mechanism | 12-valve DOHC, Chain Drive (with Dual VVT-i) | |
| Fuel System | Sequential Multiport Fuel Injection (SFI) D-4ST | |
| Displacement | cm3 (cu. in.) | 1618 (98.7 ) |
| Max. Output (EEC) | kW@rpm | 200@6500*1
192@6500*2 |
| Max. Torque (EEC) | N*m@rpm | 370@3000 to 4600*1
360@3000 to 4600*2 |
Hybrid System (for HV Models)
The hybrid system of this hybrid vehicle employs the Toyota Hybrid System-II (THS-II) under the "Hybrid Synergy Drive" concept*.
Hybrid vehicles use a combination of 2 kinds of power sources, such as an engine and HV battery, so as to take advantage of the benefits provided by each power source while compensating for each other's shortcomings. As a result, efficient operation is achieved.
Hybrid vehicles do not need their batteries to be charged externally unlike existing electric-only vehicles. Therefore, special infrastructure is not required to use hybrid vehicles.
*: The "Hybrid Synergy Drive" concept consists of 4 key benefits: Fuel efficiency, low emissions, seamless acceleration, and silent performance.
C551 Manual Transaxle (for Gasoline Models)
A C551 5-speed manual transaxle is used on 1KR-FE engine.
| Transaxle Type | C551 | |
| Gear Ratio | 1st | 3.545 |
| 2nd | 1.913 | |
| 3rd | 1.310 | |
| 4th | 1.027 | |
| 5th | 0.850 | |
| Reverse | 3.214 | |
| Differential Gear Ratio | 4.294 | |
EC6E 6-speed Manual Transaxle (for Gasoline Models)
An EC6E 6-speed manual transaxle is used on manual transaxle models with the M15A-FKS engine.
| Transaxle Type | EC6E | |
| Gear Ratio | 1st | 3.538 |
| 2nd | 2.045 | |
| 3rd | 1.392 | |
| 4th | 1.029 | |
| 5th | 0.818 | |
| 6th | 0.658 | |
| Reverse | 3.333 | |
| Differential Gear Ratio | 4.214 | |
EA67F 6-speed Manual Transaxle (for GR YARIS)
An EA67F 6-speed manual transaxle is used on manual transaxle models with the G16E-GTS engine.
| Transaxle Type | EA67F | |
| Gear Ratio | 1st | 3.538 |
| 2nd | 2.238 | |
| 3rd | 1.535 | |
| 4th | 1.162 | |
| 5th | 1.081 | |
| 6th | 0.902 | |
| Reverse | 3.831 | |
| Differential Gear Ratio | 1st to 4th | 3.941 |
| 5th to 6th, Reverse | 3.350 | |
K320 Continuously Variable Transaxle (CVT) (for Gasoline Models)
Unlike the previous system that transmitted motive force using only a metal belt held between pulleys, the K320 CVT has an additional gear transmission mechanism similar to a manual transaxle which is used when starting off and during low-speed driving. This has achieved both the smooth acceleration of the traditional CVT at low accelerator opening angles, as well as a direct acceleration feeling emphasizing the shift feeling when at high accelerator opening angles.
| Transaxle Type | K320 | |
| Gear Ratio | Forward | 3.362 |
| Reverse | 3.120 | |
| Pulley Ratio | Forward | 2.236 to 0.447 |
| Reverse | - | |
| Differential Gear Ratio | 3.781 | |
P910 Hybrid Vehicle Transaxle (for HV Models)
A P910 hybrid vehicle transaxle is used on models with the M15A-FXE engine.
Suspension
A MacPherson strut type independent suspension is used for the front.
A torsion-beam type suspension is used for the rear.
A double-wishbone type independent suspension, which consists of an upper control arm, 2 lower suspension arms and a trailing arm, is used for rear. (GR YARIS)
Steering
A rack and pinion type steering gear assembly is used.
An Electric Power Steering (EPS) system is used.
A manual tilt and manual telescopic system is used.
Brake (YARIS)
|
*1: Gasoline Models for Europe *2: Models for Australia *3: HV Models for Europe |
||
| Item | Specification | |
| Front Brake | Type | Ventilated Disc |
| Rotor Size | 255.0 mm x 22.0 mm (10.0 in. x 0.866 in.)*2 | |
| 260.0 mm x 22.0 mm (10.2 in. x 0.866 in.)*1 | ||
| 282.0 mm x 22.0 mm (11.1 in. x 0.866 in.)*1 *3 | ||
| Rear Brake (for Disc) | Type | Solid Disc |
| Rotor Size | 274.0 mm x 10.0 mm (10.8 in x 0.39 in) | |
| Rear Brake (for Drum) | Type | Leading-trailing Drum |
| Drum Inner Diameter | 200.0 mm (7.87 in.)*2 | |
| 202.5mm (8.0 in)*1 | ||
| Brake Control System | Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRC), Vehicle Stability Control (VSC), Active Cornering Assist (ACA), hill-start assist control, steering cooperative control, emergency brake signal, brake hold*3 and secondary collision brake. | |
Brake (GR YARIS)
| Item | Specification | |
| Front Brake | Caliper | Opposed Type 4-piston Monoblock Caliper |
| Type | Ventilated Disc | |
| Rotor Size | 356.0 mm x 28.0 mm (14.0 in. x 1.10 in.) | |
| Rear Brake | Caliper | Opposed Type 2-piston Monoblock Caliper |
| Type | Ventilated Disc | |
| Rotor Size | 297.0 mm x 18.0 mm (11.7 in x 0.71 in) | |
| Brake Control System | Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRC), Vehicle Stability Control (VSC), hill-start assist control, steering cooperative control, emergency brake signal, secondary collision brake and expert mode. | |