FUNCTION
|
*1: Models with Toyota Safety Sense *2: Models with blind spot monitor system *3: Models with parking assist monitor system *4: Models with clearance warning ECU assembly *5: Models with CVT *6: Models with stop and start system *7: Models with headup display *8: Models with DCM *9: Models with radio and display receiver assembly *10: Models with entry and start system *11: Models with tire pressure warning system *12: Models without entry and start system *13: Models with CAN compatible optional devices *14: Models with active noise control system *15: AWD models |
|
| Central Gateway ECU (Network Gateway ECU) | Forward Recognition Camera*1 |
| Millimeter Wave Radar Sensor Assembly*1 | Blind Spot Monitor Sensor LH*2 |
| Rear Television Camera Assembly*3 | Clearance Warning ECU Assembly*4 |
| Transmission Control ECU*5 | ECM |
| Engine Stop and Start ECU*6 | Headup Display (Meter Mirror Sub-assembly)*7 |
| DCM (Telephone Transceiver Assembly)*8 | Radio and Display Receiver Assembly*9 |
| Combination Meter Assembly | Skid Control ECU (Brake Actuator Assembly) |
| Airbag Sensor Assembly | Steering Sensor |
| Power Steering ECU Assembly | Certification ECU (Smart Key ECU Assembly)*9 |
| Air Conditioning Amplifier Assembly | Main Body ECU (Multiplex Network Body ECU) |
| Electrical Key and TPMS Receiver Assembly*10, *11/Door Control and Tire Pressure Monitoring System Receiver Assembly*11, *12 | Option Connector (Bus Buffer ECU)*13 |
| Stereo Component Equalizer Assembly*14 | 4WD ECU Assembly*15 |
DIAGNOSIS
If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.
The 5-digit DTCs can be read by connecting the GTS to the DLC3.
For details, refer to the Repair Manual.