Home › Power Source / Network › G16E-GTS (BATTERY / CHARGING) › CHARGING SYSTEM › from 2020.09
NM36W0E _57 Power Source / Network _095786 G16E-GTS BATTERY / CHARGING _0449659 CHARGING SYSTEM DE DETAILS F

G16E-GTS BATTERY / CHARGING  CHARGING SYSTEM  DETAILS  BATTERY SENSOR  


CONSTRUCTION


a.

The battery state sensor assembly is installed to the negative (-) battery terminal and outputs the state of the auxiliary battery based on the input/output current, voltage, temperature, State Of Charge (SOC), State Of Health (SOH), State OF Function (SOF) and self-diagnosis results to the ECM via LIN communication.


b.

To detect the current of the auxiliary battery, a shunt resistor installed inside the battery state sensor assembly is used to convert the voltage that is generated in the shunt resistor due to the auxiliary battery charge and discharge current and calculate the current.


c.

The auxiliary battery temperature is calculated from the resistance value of the thermistor built into the battery state sensor assembly.

W136299E04
0.479,2.167 1.802,2.417 1.323,0.25 10 false Auxiliary Battery 0.49,3.469 2.115,3.667 1.625,0.198 10 false : LIN Communication Line 3.365,0.885 3.635,1.083 0.271,0.198 10 false IC 2.99,1.604 4.135,1.781 1.146,0.177 10 false Shunt Resistor 2.469,2.021 4.531,2.302 2.063,0.281 10 false Battery State Sensor Assembly 5.854,0.854 6.479,1.188 0.625,0.333 10 false ECM