Use the same procedure for the LH and RH sides.
The procedure described below is for the LH side.
84233
1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw.
Connect the connector.
62414A
2.INSTALL CENTER PILLAR LOWER GARNISH
Use the same procedure as for the RH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
62332A
3.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP
Connect the rear door opening trim weatherstrip.
62312B
4.CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP
Connect the front door opening trim weatherstrip.
73220
5.CONNECT FRONT SEAT OUTER BELT ASSEMBLY
Use the same procedure as for the RH side.
Click hereVehicle Interior>SEAT BELT>FRONT SEAT OUTER BELT ASSEMBLY>INSTALLATION
73233
6.INSTALL LAP BELT OUTER ANCHOR COVER
Use the same procedure as for the RH side.
Click hereVehicle Interior>SEAT BELT>FRONT SEAT OUTER BELT ASSEMBLY>INSTALLATION
67918F
7.INSTALL REAR DOOR SCUFF PLATE INSIDE
Use the same procedure as for the RH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
67914B
8.INSTALL FRONT DOOR SCUFF PLATE
Use the same procedure as for the RH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
76974F
9.INSTALL REAR UNDER SIDE COVER (for HV Model)
72693
10.INSTALL REAR SEAT CUSHION LOCK HOOK (for Gasoline Model)
11.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Gasoline Model)
73350C
12.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Gasoline Model)