Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2020.03–2020.07
RM36W0E _58 Vehicle Interior _087985 METER / GAUGE / DISPLAY _0420292 METER / GAUGE SYSTEM U

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  TERMINALS OF ECU  


COMBINATION METER ASSEMBLY


E391347N09
1.5,0.667 1.917,0.917 0.417,0.25 5.167,0.667 5.583,0.917 0.417,0.25 1.625,0.698 2.083,0.896 0.458,0.198 10 false H6 5.292,0.698 5.75,0.896 0.458,0.198 10 false H7

a.

Measure the voltage and resistance and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Terminal Description Condition Specified Condition
H6-1 (B) - Body ground Auxiliary battery Ignition switch off 11 to 14 V
H6-9 (CANH) CAN communication line - -
H6-10 (MSCL) Local bus communication line - -
H6-11 (TX1-) - Body ground Outside temperature sensor signal - -
H6-14 (FV) - Body ground Fuel sender gauge (Power source) Ignition switch ON Pulse generation
(See waveform 1)
H6-15 (MSTI) - Body ground Steering pad switch signal Ignition switch ON, up, down, right and left switches on steering pad switch not pushed 4.8 to 5.2 V
H6-16 (TX1+) - Body ground Outside temperature sensor signal - -
H6-19 (EP) - Body ground Ground Always Below 1 Ω
H6-20 (SI) - Body ground Speed signal for other system (Input) Ignition switch ON, wheel being rotated Pulse generation
(See waveform 2)
H6-22 (B) - Body ground Auxiliary battery Ignition switch off 11 to 14 V
H6-23 (ES) - Body ground Ground Always Below 1 Ω
H6-24 (FE&B) -Body ground Fuel sender gauge (Ground) Always Below 1 Ω
H6-25 (CANL) CAN communication line - -
H6-27 (MSCH) Local bus communication line - -
H6-31 (FR) - H6-24 (FE&B) Fuel level signal Ignition switch ON, fuel level full → low (fuel level warning light on) Pulse generation
(See waveform 3)
H6-32 (MSM+) - Body ground Steering pad switch signal Ignition switch On, OK and back switches on steering pad switch not pushed 4.8 to 5.2 V
H6-35 (A) - Body ground Steering vibration signal Ignition switch ON, steering vibration off → ON Below 1 V → 11 to 14 V
H6-36 (+S) - Body ground Speed signal for other systems (Output) Ignition switch ON, wheel being rotated Pulse generation
(See waveform 2)
H6-38 (IG+) - Body ground Ignition switch signal Ignition switch off → Ignition switch ON Below 1 V → 11 to 14 V
H7-1 (LL) - Body ground LH turn signal LH turn indicator light off → blinking Below 1 V → 11 to 14 V ←→ Below 1 V
H7-2 (LR) - Body ground RH turn signal RH turn indicator light off → blinking Below 1 V → 11 to 14 V ←→ Below 1 V
H7-5 (TRNL) - Body ground LH turn signal LH turn indicator light off → blinking Below 1 V → 11 to 14 V ←→ Below 1 V
H7-6 (TRNR) - Body ground RH turn signal RH turn indicator light off → blinking Below 1 V → 11 to 14 V ←→ Below 1 V
H7-7 (LP) - Body ground Security indicator signal Security indicator light off → blinking Below 2 V → Pulse generation
H7-16 (SW) - Body ground*1 Brake fluid level signal Ignition switch ON, brake fluid level not low (brake warning light off) → low (brake warning light on) 11 to 14 V → Below 1 V
H7-17 (HAZ) - Body ground Hazard warning signal switch signal Hazard warning signal switch off → on 11 to 14 V → Below 1 V
H7-31 (OILW) - Body ground Engine oil level signal Ignition switch ON, engine oil level not low → low Below 1 V → 11 to 14 V
H7-32 (VCM) - Body ground*2 Vacuum warning switch signal Engine started, vacuum warning switch off (brake warning light off) → on (brake warning light on) 11 to 14 V → Below 1 V
H7-34 (BKL) - Body ground Front right seat belt warning signal Ignition switch ON, front right seat belt unfastened → fastened Below 1 V → 11 to 14 V

*1: w/ Level Warning Switch

*2: for M15A-FKS


E400350N01
2.958,0.896 3.417,1.094 0.458,0.198 10 false GND

Waveform 1:
Item Condition
Tester connection H6-14 (FV) - Body ground
Tool setting 2.5 V/DIV., 20 ms./DIV.
Condition Ignition switch ON
Specified Condition 4.5 to 5.5 V


E267248N02
2.969,1.198 3.323,1.396 0.354,0.198 10 false GND 1.156,1.625 1.365,1.833 0.208,0.208 10 false A

Waveform 2:
Item Condition
Tester connection
·

H6-20 (SI) - Body ground

·

H6-36 (+S) - Body ground


Tool setting 5 V/DIV., 20 ms./DIV.
Condition Ignition switch ON, wheel being rotated

HINT:

When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.



E400349N01
2.958,0.917 3.396,1.219 0.438,0.302 10 false GND 0.615,0.646 0.771,0.844 0.156,0.198 10 false A 1.823,0.646 1.979,0.844 0.156,0.198 10 false A

Waveform 3:
Item Condition
Tester connection H6-31 (FR) - H6-24 (FE&B)
Tool setting 2.5 V/DIV., 20 ms./DIV.
Condition Ignition switch ON, fuel level full → low (fuel level warning light on)

HINT:

(A) varies depending on the fuel level.

·

Fuel level full: 4.2 to 4.6 V

·

Fuel level low (fuel level warning light on): 0.3 to 1.1 V