Home › Vehicle Interior › METER / GAUGE / DISPLAY › HEADUP DISPLAY SYSTEM
RM36W0E _58 Vehicle Interior _087985 METER / GAUGE / DISPLAY _0420293 HEADUP DISPLAY SYSTEM W

METER / GAUGE / DISPLAY  HEADUP DISPLAY SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE HEADUP DISPLAY SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing with the GTS

i.

Select the setting by referring to the table below.

Display
Tester Display Description Default Setting ECU
Projection Adjustment (Tilt) Headup display image calibration
(Tilt calibration)
Default $03:Clockwise (+3),$02:Clockwise (+2),$01:Clockwise (+1),$00:Default,$FF:Anti-Clockwise (-1),$FE:Anti-Clockwise (-2),$FD:Anti-Clockwise (-3) Meter mirror sub-assembly
Projection Adjustment (Keystone) Headup display image calibration
(Keystone calibration)
Default $03:Narrow Top (+3),$02:Narrow Top (+2),$01:Narrow Top (+1),$00:Default,$FF:Narrow Bottom (-1),$FE:Narrow Bottom (-2),$FD:Narrow Bottom (-3) Meter mirror sub-assembly
Projection Adjustment (Distortion) Headup display image calibration
(Distortion calibration)
Default $03:Convex (+3),$02:Convex (+2),$01:Convex (+1),$00:Default,$FF:Concave (-1),$FE:Concave (-2),$FD:Concave (-3) Meter mirror sub-assembly
Audio Information Display Function Audio system operation status display setting for headup display ON $00:OFF,$01:ON Meter mirror sub-assembly
Master Caution Display Function Master warning display setting for headup display ON $00:OFF,$01:ON Meter mirror sub-assembly
Speed Limit Display Function Speed limit display setting for headup display ON $00:OFF,$01:ON Meter mirror sub-assembly
Turn by Turn Animation Function Route guidance to destination display setting for headup display ON $00:OFF,$01:ON Meter mirror sub-assembly
Traffic Sign Recognition Animation Function Traffic sign recognition display setting for headup display ON $00:OFF,$01:ON Meter mirror sub-assembly
Memory Call Link Function Memory call link setting for headup display image position*1 ON $00:OFF,$01:ON Meter mirror sub-assembly
Seat Switch Link Function Power seat switch link setting for headup display image position*1 ON $00:OFF,$01:ON Meter mirror sub-assembly
ECO Drive Indicator Zone Display Function ECO driving indicator function setting for headup display ON $00:OFF,$01:ON Meter mirror sub-assembly
Projection Adjustment (Tilt) Headup display image calibration*1
(Tilt calibration)
Default $05:Clockwise (+5),$04:Clockwise (+4),$03:Clockwise (+3),$02:Clockwise (+2),$01:Clockwise (+1),$00:Default,$FF:Anti-Clockwise (-1),$FE:Anti-Clockwise (-2),$FD:A**cut** Meter mirror sub-assembly
50006 14
HINT:
·

Depending on the specifications of the vehicle, some items may not be displayed.

·

*1: Not applicable to this vehicle





b.

Customizing with the multi-information display

i.

Turn the ignition switch to ON.


ii.

Select the settings tab on the multi-information display and set the customize settings.

Display Detail Description Setting ECU
HUD Main - Headup display system setting ON/OFF Meter mirror sub-assembly
HUD Brightness/Position Brightness and display position setting for headup display -
HUD Driving Support Tachometer Settings Display setting for headup display Blank/Eco Indicator/Tachometer
Navigation Display setting for headup display ON/OFF
Lane Display setting for headup display ON/OFF
Driving Assist Display setting for headup display ON/OFF
Compass Display setting for headup display ON/OFF
Audio Display setting for headup display ON/OFF
HUD Rotation Headup display image calibration (rotation calibration) -

HINT:

Depending on the specifications of the vehicle, some items may not be displayed.