CHECK FRONT WIPER CONTROL
Intermittent control function
Turn the ignition switch to ON.
Move the front wiper switch to the INT position.
Check that the intermittent operation interval is approximately 4 seconds.
CHECK WASHER CONTROL
Front washer cooperation
Turn the ignition switch to ON.
Hold the washer switch in the Fr WASH position for approximately 0.5 seconds or more and check that the front wipers operate in LO and washer fluid is sprayed.
Release the washer switch and check that the front wipers operate for 3 cycles.
Rear washer cooperation
Turn the ignition switch to ON.
Hold the washer switch in the Rr WASH position for approximately 0.5 seconds or more and check that the rear wiper operates in LO and washer fluid is sprayed.
Release the washer switch and check that the rear wiper operates for 2 to 3 cycles.
Drip prevention wiper function
Perform this inspection with the vehicle stopped.
Turn the ignition switch to ON.
Operate the washers and check that approximately 3 seconds after washer cooperation operates, the wipers operate 1 cycle.