Wear protective gloves. Sharp areas on the parts may injure your hands.
73350C
1.DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
2.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Gasoline Model)
3.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for HV Model)
72693
4.REMOVE REAR SEAT CUSHION LOCK HOOK
73717D
5.REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER
73735A
6.REMOVE CHILD RESTRAINT SEAT GUIDE CUP
71611
7.REMOVE REAR SEAT CUSHION PAD (for Gasoline Model)
71503A
8.REMOVE OCCUPANT DETECTION SENSOR (REAR SEAT CUSHION PAD SUB-ASSEMBLY) (for Gasoline Model)
Disengage the hooks.
Using a screwdriver, disengage the claws to remove the occupant detection sensor (rear seat cushion pad sub-assembly) from the bench type rear seat cushion cover as shown in the illustration.
| *a | Screwdriver | - | - |
71503A
9.REMOVE OCCUPANT DETECTION SENSOR (REAR SEAT CUSHION PAD SUB-ASSEMBLY) (for HV Model)
Disengage the hooks.
Using a screwdriver, disengage the claws to remove the occupant detection sensor (rear seat cushion pad sub-assembly) from the bench type rear seat cushion cover as shown in the illustration.
| *a | Screwdriver | - | - |