81570
1.INSTALL CENTER STOP LIGHT ASSEMBLY
Engage the claws to install the center stop light assembly.
81006
2.INSTALL CENTER STOP LIGHT SET
for Type A:
Connect the connector.
for Type B:
Connect the connector.
Engage the claws to install the center stop light set.
Install the 2 screws.
Do not put screws into the service holes where a screwdriver is inserted.
If there is looseness even after tightening the screws, replace the center stop light set with a new one.
3.INSTALL CENTER STOP LIGHT COVER LH
Engage the claws to install the center stop light cover LH.
4.INSTALL CENTER STOP LIGHT COVER RH
Use the same procedure as for the LH side.