84329
1.INSPECT TURN SIGNAL SWITCH
| *a | Component without harness connected
(Turn Signal Switch) |
Resistance Check
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| z6-15 (L_OFF) - z6-5 (EL) | Light control switch in OFF position | Below 1 Ω |
| z6-7 (A) - z6-5 (EL) | Light control switch in AUTO position | Below 1 Ω |
| z6-12 (H) - z6-5 (EL) | Light control switch in head position | Below 1 Ω |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| z6-11 (HF) - z6-5 (EL) | Dimmer switch in high flash position | Below 1 Ω |
| z6-16 (HU) - z6-5 (EL) | Dimmer switch in high position | Below 1 Ω |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| z6-4 (B) - Z6-5 (EL) | Fog light switch in rear position | Below 1 Ω |
| z6-13 (BFG) - Z6-5 (EL) | Fog light switch in front position | Below 1 Ω |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| z6-8 (TR) - z6-5 (EL) | Turn signal switch in neutral position | 10 kΩ or higher |
| z6-14 (TL) - z6-5 (EL) | Turn signal switch in neutral position | 10 kΩ or higher |
| z6-8 (TR) - z6-5 (EL) | Turn signal switch in right turn position | Below 1 Ω |
| z6-8 (TR) - z6-5 (EL) | Turn signal switch in full right turn position | Below 1 Ω |
| z6-8 (TR) - z6-6 (CR) | Turn signal switch in full right turn position | Below 1 Ω |
| z6-6 (CR) - z6-5 (EL) | Turn signal switch in full right turn position | Below 1 Ω |
| z6-14 (TL) - z6-5 (EL) | Turn signal switch in left turn position | Below 1 Ω |
| z6-14 (TL) - z6-5 (EL) | Turn signal switch in full left turn position | Below 1 Ω |
| z6-14 (TL) - z6-6 (CR) | Turn signal switch in full left turn position | Below 1 Ω |
| z6-6 (CR) - z6-5 (EL) | Turn signal switch in full left turn position | Below 1 Ω |
If the result is not as specified, replace the turn signal switch.
The left turn or right turn condition indicates a condition in which the turn signal switch will return to the neutral position after releasing your hand from the turn signal switch (turn signal switch is operated approximately 6.3°).
The full left turn or full right turn condition indicates a condition in which the turn signal switch will not return to the neutral position after releasing your hand from the turn signal switch (turn signal switch is operated 10.5°).